Header Image

RF assembly configurator

What is the WebPCF

The WebPCF from HUBER+SUHNER is the fast and easy way to design, specify and request a coaxial RF cable assembly online.
  • Intelligent online cable assembly configuration tool to design, build and test your own RF cable assemblies
  • Create, save and print the HUBER+SUHNER data sheet based on your input
  • Send request for quotation online for price and delivery information.

How to build your own cable assembly

  • Select product group
  • Build your own assembly by choosing either the cable or connector left and right
  • Define reference points and orientation (optional)
  • Add your required accessories (cable entry protection, marking)
  • Enter cable assembly length and measure of unit
  • Define your electrical requirements (optional)
  • Enter your personal configuration name (optional)
  • Test your assembly configuration to proceed to the next step
  • Please be sure to use the upload function for attaching your individual requirements and specifications
  • Once you have submitted your request for quotation, HUBER+SUHNER will provide a complete quotation with price and delivery information

Which products are covered within the WebPCF

The WebPCF includes all standard RF components to build your own cable assembly. Should you have specific requirements, please contact your HUBER+SUHNER sales representative.


FAQ's

What is the WebPCF?
The WebPCF is an online tool to design and build your own specific cable assembly

What product range is covered by the WebPCF?
The WebPCF covers all RF (radio frequency) and MW (micro wave) cable assembly variations

Who can I contact if I have any questions?
Please contact your sales representative or send an email to rf.webpcf@hubersuhner.com

I would like to ask HUBER+SUHNER for a quotation based on my drawing and specification
You can upload your drawings and specifications (pdf only), once you have completed the cable assembly configuration

Can I specify another manufacturer's component?
Yes, please upload the drawing or specification or specify in the comments field

Where are the cable assemblies manufactured?
HUBER+SUHNER provides cable assemblies from their global operations network


RF Cable Assembly Information

  • Corrugated RF Cable Assembly
  • Hand formable Microwave Cable Assembly
  • Semi-Rigid Microwave Cable Assembly
  • Flexible Microwave Cable Assembly
  • Flexible Test Cable Assembly

Standard tolerances for cable assembly manufacturing

Stripping tolerance for open end solution

Length (mm)

Flexible RF Cables
Corrugated RF Cables
Hand formable Microwave Cables

Semi-Rigid
MicrowaveCables
0 to 2.0 +/- 0.4 mm +/- 0.20 mm
2.1 to 5.0 +/- 0.4 mm +/- 0.20 mm
5.1 to 10.0 +/- 0.4 mm +/- 0.20 mm
10.1 to 15.0 +/- 0.4 mm +/- 0.25 mm
15.1 to 20.0 +/- 0.4 mm +/- 0.30 mm
20.1 to 25.0 +/- 0.5 mm +/- 0.35 mm
25.1 to 30.0 +/- 0.6 mm +/- 0.40 mm
30.1 to 35.0 +/- 0.7 mm +/- 0.45 mm
35.1 to 40.0 +/- 0.8 mm +/- 0.50 mm
40.1 to 45.0 +/- 0.9 mm +/- 0.55 mm
45.1 to 50.0 +/- 1.0 mm +/- 0.60 mm
> 50.1 to be checked to be checked
Smaller tolerances can be requested

Excess Dielectric by open end solution

Product Group Max. length
Flexible RF Cables 0.5 mm
Hand formable Microwave Cables (Sucoform) 0.5 mm
Semi-Rigid Microwave Cables 0.5 mm
Corrugated RF Cables (LISCA) 2.0 mm

Heat Shrink length

Length / mm All product groups
0 to 100 +/-   3.0 mm
101 to 300 +/-   5.0 mm
301 to 500 +/-   10.0 mm
501 to 1000 +/-   15.0 mm
> 1000 +/-   2%

Position of Marking for left and right side marking

Marking position 20 mm (+/- 2 mm) from left or right side cable entry or cable entry protection.

Connector Orientation Tolerances

All flexible cables and
corrugated cables
Cable length  = 400mm +/-10°
Cable length  > 400mm +/-20
Semi-rigid cables and
hand formable cables
+/- 5° for all lengths

Product information