English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Indoor cable system

Optipack trunk system (MTP-MTP)

Optipack trunk system (MTP-MTP)

Optipack trunk cables are high density multi-stranded cables which form the backbone of the data center. Available in different fiber-counts up to 144 fibers, the Optipack trunks reduce the installation time by consolidating multiple sub-units into a single cable. This approach significantly reduces the overall diameter of the cable and provides much better space utilization of cable routing channels.

Optipack trunk cables are available with 8, 12 and 24 fiber sub-units so that users can deploy Base-8, Base-12 or Base-24 infrastructures to suit their MTP connectivity requirements.

Optipack harness system (LC-LC)

Optipack harness system (LC-LC)

Optipack harness systems (LC-LC) are used as pre-connectorised backbone links between cabinets in the data center. Generally, trunk harnesses will be connected to the rear side of patching modules and LC jumpers will be used as equipment cords to servers and switches. Backbones are generally deployed with singlemode fiber because only this fiber offers a future-proofed infrastructure for higher data rates. Multimode LC trunk harnesses are not recommended because LC multimode connectors do not offer an upgrade to 40G or 100G over parallel optics.

Optipack conversion harness system (MTP-MTP)

Optipack conversion harness system (MTP-MTP)

Optipack conversion harnesses allow users to convert their existing MTP backbone cables to an MTP type which matches their active equipment. Conversion harnesses are a low-loss alternative to conversion modules because they eliminate one mated MTP pair across the link. Many of today’s legacy infrastructures are built using a Base-12 MTP backbone design, however experience shows us that this connector is rarely used on higher data rate switches or servers. Currently Base-8 is the preferred connector for 40G (SR4) transceivers and Base-24 is the preferred connector for 100G transceivers (SR10).
The wide variation of MTP connector types in the modern data center has led to some confusion concerning the identification of different Base-types. HUBER+SUHNER conversion harnesses are supplied with colour coded boots so that users can quickly identify the required connectivity type. This is particularly important with conversion harnesses that have different connectors at each end of the assembly.
 

Optipack transition harness system

Optipack transition harness system

Optipack transition harnesses provide a transition from MTP connectivity in the backbone to LC duplex connectivity on switches and servers. Instead of using LC patch panels and cords, the harness provides a fast and compact alternative that plugs directly into equipment transceivers. Many of the data centers today are designed with multimode MTP backbones because this is the most flexible and future-proofed
way of adapting from one type of connector to another.
 

MASTERLINE Compact

MASTERLINE Compact

MASTERLINE Compact is a pre-assembled cable system which is extremely suitable as a patch or connecting cable between two distributor units for short to medium distances:

  • External patch / connecting cable (interconnection
  • As a connection between the main distribution device and transmitters
  • As a connection between the main distribution device and terminal area

MASTERLINE Lite

MASTERLINE Lite

MASTERLINE Lite is a low-cost, pre-assembled cable system designed primarily for indoor applications:

  • Building backbone (horizontal wiring)
  • LAN wiring and private networks

SMARTLINE Breakout

SMARTLINE Breakout

The SMARTLINE break-out cable is suitable for shorter link lengths and it is commonly used as a «multi-patch» cable for point-to-point connections in the following areas:

  • Installation inside buildings
  • Data cable in distribution networks
  • For horizontal cabling and collapsed backbones

SMARTLINE Riser

SMARTLINE Riser

Are you looking for a cable system with pre-assembled riser cables (mini-breakouts) that offers optimised diameters and optimum flame propagation, can be used in a protected environment, does not pose any special requirements on the connector in terms of strain relief, and is exclusively designed for indoor applications? Then SMARTLINE Riser is the right cable system for you. It can also be easily and quickly installed.

SMARTLINE Optipack

SMARTLINE Optipack

Do your requirements specify a metal-free internal cable with an optimised outer diameter that combines ideally with multifiber connectors (MTP/MPO) and assemblies, and offers a customisable modular fanout length? Then look no further than SMARTLINE Optipack, which is ideally suited for use as an efficient datacenter rack cabling solution.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238

Survey: Your opinion is important to us!


Participate in the customer survey now and with a little luck win an iPad Pro.

Click here to participate in the survey.