Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

English

MASTERLINE Hybrid

MASTERLINE Ultimate Hybrid (MLUH)

MASTERLINE Ultimate Hybrid (MLUH)

Hybrid-riser cable with compact connector head


HUBER+SUHNER's most innovative hybrid cabling system for remote radio installation: MASTERLINE Ultimate Hybrid. The pre-connectorised factory-sealed hybrid systems supports up to 6 RRHs and connects the remote radios with easy-to-install Q-ODC fiber optic and power jumpers. The robust connector head with an integrated pulling eye allow for easy cable lifting without the need for hoisting grips. The encapsulated connector head can be directly attached to the mast with a single "click" at a pre-mounted adaptor plate. These unique features make MASTERLINE Ultimate Hybrid the best-in-class product in terms of ease of mast-top installation, installation robustness and efficiency.

MASTERLINE Extreme Hybrid (MLEH)

MASTERLINE Extreme Hybrid (MLEH)

Hybrid-riser cable with compact divider


HUBER+SUHNER’s hybrid cabling system is the most efficient and easiest to install product available on the market. Mobile operators on four continents verified that MASTERLINE Extreme Hybrid can be installed in half of the time of competitive hybrid solutions based on corrugated coax cable designs. The factory-terminated "plug & play" system in combination with a highly flexible and easy-to-route cable makes the HUBER+SUHNER solution the hybrid cable of choice for operators, system vendors and installers alike.
The pre-terminated hybrid cable assembly minimises the quantity of cables running up the mast. The compact divider splits the optical fiber and DC power cable into individual ruggedised outdoor cables which are linked to the RRHs – either directly or via extension jumpers without the need for bulky mast mount distribution boxes. The RRH jumpers allow an adaptation to different RRH interfaces and therefore make the solution independent from the system vendor’s hardware.

MASTERLINE Classic Hybrid (MLCH)

MASTERLINE Classic Hybrid (MLCH)

Hybrid-riser cable with distribution box


This solution, a factory-terminated hybrid-riser cable assembly, minimises the amount of cables running up the mast. At the hybrid distribution box the multi-fiber/wire cable is split into individual cables which are linked to the RRHs with short jumper cables. The jumpers allow an adaptation to different RRH interfaces and therefore make the solution independent from the system vendor’s hardware. A box solution enables the use of circuit breaker and/or surge protection devices.
However, this installation method requires large and bulky boxes on the top of the mast. With increasing number of remote ratios per site, space limitations and wind load become critical issues. Many operators also want to avoid the risk of opening and maintaining mast-top boxes by non-trained or non-authorised persons.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238