Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

English

Additional Information

Battery cables

RADOX battery cables are high temperature resistant products with a reduced outer diameter.

The cables are highly resistant to temperature, ozone, weathering, hydrolysis and offer excellent resistance to battery acid and cooling agents. They are also resistant against oils, fuels and other fluids used inside and outside of the motor compartment.

RADOX® 155

RADOX® 155

  • Single core
  • Flexible (FLR41X or FLR91X)

RADOX® Elastomer S

RADOX® Elastomer S

  • Single core
  • Flexible (FLR33X)

RADOX® Elastomer S FLEX

RADOX® Elastomer S FLEX

  • Single core
  • High flexible (FLR33X)

RADOX® Elastomer S thickwall

RADOX® Elastomer S thickwall

  • single core
  • Flexible, thick-wall (FL33X)

RADOX® screened

RADOX® screened

  • Single core, screened
  • FLR41XC33X-1x__T150

RADOX® screened multi core

RADOX® screened multi core

  • Multi core, screened
  • FLR41XC33X-NX_T150

Signal cables

A growing demand of sensors, higher operating temperatures and restricted space are typical in today's motor compartments. These cables have been developed with these specific requirements in mind.

These cables are class D temperature range cables with reduced outer diameter. They have superb resistance to motor oils, fluids and hydrolysis. Thanks to their electron beam cross-linked RADOX® insulation, these cables have excellent resistance to extremes of temperature and abrasion even with reduced outer diameter. Furthermore these RADOX® cables have outstanding electrical characteristics.

The characteristics of these RADOX® cables make them ideal for use in a wide range of applications, where space is at a premium and where cables are subjected to high temperatures. Even high humidity levels and motor vehicle fluids do not negatively affect the lifetime of the cables.

ETFE

ETFE

  • Number of conductors 1
  • Cross section 0.14 to 6 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +200 °C (3000 h)
  • Min. bending radius 3 × cable dia.

RADOX® 155SFLR

RADOX® 155SFLR

  • Number of conductors 1
  • Cross section 0.35 to 6 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

RADOX® 155SRW

RADOX® 155SRW

  • Number of conductors 1
  • Cross section 0.14 to 1 mm2
  • Voltage rating 60 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

RADOX® Anticapillary (double insulation)

RADOX® Anticapillary (double insulation)

  • Number of conductors 1
  • Cross section 0.35 to 6 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

RADOX® Anticapillary (single insulation)

RADOX® Anticapillary (single insulation)

  • Number of conductors 1
  • Cross section 0.35 to 10 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

Databus cables

Providing cables that reliably transmit ever increasing volumes of data while meeting demaning market requirements is the greatest challenge for cable manufacturers. For this purpose, HUBER+SUHNER has included databus cables in its product range for different markets.

HUBER+SUHNER combines extensive expertise in data communication with electron-beam-cross-linked material technology. The databus cables developed in-house (pre-terminated on request) provide reliable solutions for use in high-temperature applications and harsh environmental conditions. The databuses fulfil the requirements of different markets due to their excellent mechanical and electrical characteristics.

RADOX® Databus bare

RADOX® Databus bare

  • Databus cable for transmitting information at high frequencies in road vehicles
  • Bare

RADOX® Databus screened bare

RADOX® Databus screened bare

  • Databus cable for transmitting information at high frequencies in road vehicles
  • Screened, bare

RADOX® Databus screened tinned

RADOX® Databus screened tinned

  • Databus cable for transmitting information at high frequencies in road vehicles
  • Screened, tinned

RADOX® Databus tinned

RADOX® Databus tinned

  • Databus cable for transmitting information at high frequencies in road vehicles
  • Tinned

High voltage power distribution

The distribution of electrical energy in electric and hybrid vehicles represents a major challenge in the design and construction of distribution systems, especially in terms of safety and shielding. This is due to the extremely high and potentially fatal currents that are generated when the vehicle is in use. Consequently, the systems not only have to be perfectly shielded to prevent interference with the complex on-board electronics, but also to avoid delivering electric shocks in the event of an accident.

HVDU - High voltage distribution unit

HVDU - High voltage distribution unit

The HVDU (High Voltage Distribution Unit) distributes energy between the battery, alternator, engine and secondary units. HUBER+SUHNER develops customised HVDUs and can even deliver the preassembled cabling as part of the service.

RACS - RADOX® Automotive Connectivity System

RACS - RADOX® Automotive Connectivity System

High-voltage connections in electric vehicles are now compact, watertight and vibration-resistant. This is made possible by the latest generation of the time-proven RADOX® Automotive Connection System (RACS).

High power charging

The RADOX® High Power Charging System allows to multiply the power-throughput of a charging cable. With charging times below 15 minutes (80% State of Charge), the development puts super-fast charging within reach – even with big battery packs of new electric vehicles and trucks.

RADOX® HPC High power charging system

RADOX® HPC High power charging system

The RADOX® High Power Charging (HPC) System allows to multiply the power-throughput of a charging cable. With charging times below 15 minutes (80% State of Charge), the development puts super-fast charging within reach – even with big battery packs of new electric vehicles and trucks. Due to the integrated cooling system the RADOX® High Power Charging System offers a much smaller cable cross section than the traditional option. The cooled cables are thin, highly flexible, lightweight and easy to handle.

Sensor cables

Sensor cables for road vehicles: Resistant to low and high temperatures, flame retardant, flexible and media resistant, customer specific designs.

Pressure, knock and temperature sensors are standard today, and sensors for seatbelt tighteners, automatic transmissions, diesel pumps, ABS/EPS systems, speed monitoring plus other applications are an increasing demand. It must be ensured that critical electrical circuits will perform faultlessly under the most adverse conditions.

Electrical systems for fan motors, water pumps, power steering, brakes and accelerators are in-creasingly replacing V-belts, various hydraulic motors and mechanical actuators. Sensor cables serve for controlling the electronics and supplying power to the electric motors.

RADOX® sensor cables

RADOX® sensor cables

  • Multi core, bare
  • Sensor cables for road vehicles