Support
CISCOLive!
CISCOLive!

For the first time HUBER+SUHNER will present its fibermanagement solutions at Cisco Live in Barcelona. The Cisco’s annual customer conference is one of the most important events to build the foundation for the digital future.

28/1/2019 - 1/2/2019
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Tactical equipment

Tactical equipment
Integration density continues to increase with new generations of tactical equipment, including portable jammers, software defined radios and microwave submodules. HUBER+SUHNER provides a broad range of standard connectors, adapters and lightning protectors to meet these requirements, as well as the ability to offer application specific designs. With in-house R+D and machining capabilities.

HUBER+SUHNER can develop a custom design and quick-turn verification samples. As one of the leading companies of board-to-board solutions, HUBER+SUHNER offers an extensive array of board-to-board interconnect solutions and can achieve the smallest board-to-board footprint while still achieving outstanding electrical performance.

Applications
  • Mobile jammer units
  • Software Defined Radios (SDR)
  • RF/Microwave submodules
Requirements
  • High integration density, smaller footprint
  • Reliable, hardened equipment (EMP)
  • Customer specific options, backplane card mounting

Related Products

Minibend series

The Minibend series is a truly flexible, 100% tested, preassembled coaxial cable assembly line that is designed for use in low profile internal point-to-point interconnections between RF modules within communications systems. The patented solder-less cable junction allows bending of the cable immediately behind the connector, which eliminates the need for expensive, heavy, and performance-limiting right angle connectors.

Microbend/Microbend L

Microbend/Microbend L

HUBER+SUHNER Microbend assemblies provide you with a standard preassembled and tested high performance, cost-effective truly flexible alternative to 0.047 inch custom semi-rigid cable assemblies, eliminating the need for predefined custom lengths and bend configurations. Microbend features include 35% lower loss than 0.047 inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. Microbend assemblies are available with a wide range of connector interfaces. All Microbend assemblies are available only in a ruggedised version. Furthermore, the Microbend L features include 30% lower loss as compared to the standard Microbend cable.

Mini141

Mini141

Mini141 is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Mini141 replaces 0.141 inch custom semi-rigid cables with standard flexible cables providing 20% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Mini141 provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Minibend

Minibend

Minibend is a truly flexible coaxial cable assembly which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend replaces 0.086 inch custom semi-rigid cables with standard flexible cables, eliminating the need for predefined custom lengths and bend configurations. Minibend provides you with a preassembled and tested high performance, costeffective alternative in a variety of standard lengths and connector configurations.

Minibend/Minibend L

Minibend/Minibend L

Minibend L is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend L replaces 0.086 inch custom semi-rigid cables with standard flexible cables providing 30% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Minibend L provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Board-to-board connectors

HUBER+SUHNER MBX/MFBX/MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX/MFBX/MMBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. These series are the answer to higher integration and miniaturisation. They are the perfect solution for multiple connections from board-to-board and complex stack-ups in radio module applications.

MBX

MBX

HUBER+SUHNER MBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. MBX completes together with the MBX 2nd generation the board-to-board assortment of HUBER+SUHNER with its development based on the well-known board-to-board connector MMBX. MBX fulfils higher requirements with best in class axial misalignment of ±1.2 mm. MBX is the answer to higher integration and miniaturisation. It is the perfect solution for multiple connections from board-to-board / board-to-module and complex stack-ups in radio module applications.

MMBX

MMBX

HUBER+SUHNER MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. Along with MBX the board-to-board portfolio of HUBER+SUHNER provides highest flexibility for today´s and future radio module applications. MMBX connectors offer an operation frequency up to 12.4 GHz. The series contains of a wide range of board and cable connectors with a minimum board-to-board distance of only 6.7 mm.

SMP

SMP

HUBER+SUHNER SMP connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. SMP connectors have been MIL-SPEC qualified for defense and space flight hardware. The design of the interface and treatment of materials provide true compatibility as well as guaranteed mechanical performance over the mating life of the connector with all MIL-STD-348 SMP connectors in the market.

SMPM

SMPM

HUBER+SUHNER SMPM connectors offer unrivalled miniaturisation and performance for RF applications up to 65 GHz. SMPM connectors are MIL-SPEC qualified for defense and space flight applications. Along with the unique bend-to-the-end Microbend style cable connectors, HUBER+SUHNER offers a large portfolio of different PCB mount SMPM connectors that have been designed with optimised PCB trace launch geometries to offer a complete interconnect design solution from "wire-to-trace".

Microminiature connectors

HUBER+SUHNER connector series SMPM, SMPM-T, SMP, MMCX and MMPX are mainly used for connections to a PCB. The different connector series offer a wide range of products suitable for various applications.

VITA 67

VITA 67

HUBER+SUHNER VITA 67 is the first true high density and high performance 65 GHz coaxial interconnect system on the market. Incorporating the solderless Minibend bend-to-the-end technology tightest bending radius (1.5 mm/0.06 in) and right behind the connector. The snap-in captivation method guarantees quick, easy and precise installations without tooling or loose parts. VITA 67 is designed for side-by-side implementation with VITA 46 and VITA 66 hardware. It can be assembled with diameter 0.086 inch and smaller cable types.

SMP

SMP

HUBER+SUHNER SMP connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. SMP connectors have been MIL-SPEC qualified for defense and space flight hardware. The design of the interface and treatment of materials provide true compatibility as well as guaranteed mechanical performance over the mating life of the connector with all MIL-STD-348 SMP connectors in the market.

SMPM

SMPM

HUBER+SUHNER SMPM connectors offer unrivalled miniaturisation and performance for RF applications up to 65 GHz. SMPM connectors are MIL-SPEC qualified for defense and space flight applications. Along with the unique bend-to-the-end Microbend style cable connectors, HUBER+SUHNER offers a large portfolio of different PCB mount SMPM connectors that have been designed with optimised PCB trace launch geometries to offer a complete interconnect design solution from "wire-to-trace".

SMPM-T

SMPM-T

SMPM-T is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL-STD-348 SMPM female interface connector together with a retractable threaded nut provides an integrated solution offering unprecedented electrical and mechanical performance. The SMPM-T handles high density requirements with a connector centreline-to-centreline spacing of just 5 mm (0.20 in) while offering unmatched electrical stability at frequencies up to 67 GHz in even the harshest operating environments.

Adapters

HUBER+SUHNER is offering a wide range of adapters in various configurations like within series or between series, straight or angled designs and some with panel mount features. Adapters can also be custom designed in accordance with your application specific requirements.

Precision adapters

Precision adapters

HUBER+SUHNER precision adapter assortment focuses on performance for accurate RF measurements.

Phase shifter

Environmental qualification levels:

Thermal shock: MIL-STD-202, Method 107, 100 cycles, -55/+125 °C
Sine vibration: MIL-STD-202, Method 204, 21 g peak
Random vibration: MIL-STD-202, Method 214, 26.1 g rms
Mechanical shock: MIL-STD-202, Method 213, 750 g peak.

Phase shifters

Phase shifters

HUBER+SUHNER phase shifters allow phase change while maintaining constant VSWR and insertion loss values. These passive devices have proven to be successful in aerospace, missile, and satellite programs. The construction of all phase shifters and trimming devices incorporate fine gauge threads for precise tuning. Phase shifters are terminated with precision interfaces per MIL-STD-348 including SMA, TNC, and N (in series and between series). However, custom devices can be manufactured using other interfaces.

Environmental qualification levels:

Thermal shock: MIL-STD-202, Method 107, 100 cycles, -55/+125 °C
Sine vibration: MIL-STD-202, Method 204, 21 g peak
Random vibration: MIL-STD-202, Method 214, 26.1 g rms
Mechanical shock: MIL-STD-202, Method 213, 750 g peak.

Contact