Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
CIOE
CIOE

China International Optoelectronic Exposition (CIOE) is the world's largest exhibition in optoelectronic industry. The event is an annual gathering for the global optoelectronic professionals to network with business partners and discover the future trends.

5/9/2018 - 8/9/2018
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Vehicles

Vehicles
Combat vehicles incorporate a wide variety of land based communication equipment operating between 1 MHz and 20 GHz, including navigational aids and jammers, as well as satellite communication hardware. The vast variety of equipment establishes new standards for channel-to-channel isolation requirements, to avoid interferences and to guarantee trouble-free operation of the equipment.

HUBER+SUHNER solutions are distinguished by their high shielding performance, robustness and ease of use in the field. Additionally, our EMP protectors are used in many mobile platforms to harden the equipment against LEMP and NEMP, and to provide protection from lightning strikes to the equipment.

Applications
  • Jamming
  • Communication
  • Navigation
Requirements
  • Wide frequency range for equipment, multiple protection devices
  • Field-mountable with minimal points of entry
  • High shielding effectiveness to avoid interference

Related Products

Eacon - field terminated microwave assembly

Some applications require on site flexibility because undefined conditions in the field ask for cable length and connector configuration right on the spot, while other scenarios ask for assembly termination after the cable installation (for example, if the cable feedthrough is smaller than the connector dimension). 

Therefore, HUBER+SUHNER offers solutions to terminate microwave assemblies in the field with a tool box that allows easy, quick and solderless cable assembling, without affecting our high product standards.

Eacon

Eacon

Eacon stands for a simple, flexible and fast way to assemble microwave cables and connectors in the field without compromises to the best performance. The field mountable microwave cables and connectors are light and waterproof, built for frequencies up to 18 GHz – ready for use in the defense market as well as generally in the industrial market.

RF cables RG/Enviroflex

The PTFE/FEP cables of our RG/K series are designed for applications up to 200 °C and are characterised by low losses, especially at high frequencies. The Enviroflex cables do not contain fluorine plastics either in the dielectric nor in the jacket and thus provide a robust and environmentally friendly option.

Enviroflex

Enviroflex

The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.

RG

RG

HUBER+SUHNER high temperature coax cables are designed for applications up to 200 °C, depending on the material selection of the cable. Cable types out of this portfolio provide lowest loss especially at high frequency thanks to PTFE dielectric material.

RF cables Spuma series

The product series Spuma, S and SX provide lowest attenuation, high flexibility and optimal shielding. Products from the Spuma series are similar to the LMR® products from Times Microwave. The series with LSFH jacket material and the radiation crosslinked SX series with the RADOX® jacket offer extremely high flame protection.

Spuma

Spuma

The HUBER+SUHNER Spuma product family stands for lowest loss with halogen free materials. Shielding and VSWR are optimised up to 6 GHz. The cables are more flexible than corrugated ones, allowing easier handling and installation. Tight bending radii are possible. With this set of features, Spuma can support a multitude of application in various industries, including railway, defense, communication, instrumentation and others. Spuma products can also be used as drop-in replacement for LMR® (LMR® is a brand of Times Microwave Inc.).

LSFH cables

The PTFE/FEP cables of our RG/K series are designed for applications up to 200 °C and are characterised by low losses, especially at high frequencies. The Enviroflex cables do not contain fluorine plastics either in the dielectric nor in the jacket and thus provide a robust and environmentally friendly option.

Enviroflex

Enviroflex

The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.

Spuma

Spuma

The HUBER+SUHNER Spuma product family stands for lowest loss with halogen free materials. Shielding and VSWR are optimised up to 6 GHz. The cables are more flexible than corrugated ones, allowing easier handling and installation. Tight bending radii are possible. With this set of features, Spuma can support a multitude of application in various industries, including railway, defense, communication, instrumentation and others. Spuma products can also be used as drop-in replacement for LMR® (LMR® is a brand of Times Microwave Inc.).

Antennas

SENCITY® Road

SENCITY® Road

Vehicle roof-top antenna family for heavy-duty, bus and LRV/Metro. Provides several antenna elements in one compact housing.

GPS antennas / distribution

GPS antennas / distribution

The GPS L1 / L2 antennas are ideally suited for exterior installations on roofs. These HUBER+SUHNER antennas contain large selective patch antennas and an RF band pass filter that attenuates cellular and radar frequency ranges in order to minimise interferences and blocking effects.

SENCITY Shield

SENCITY Shield

Supporting an ultra broad frequency range from 20 MHz to 10 000 MHz, the SENCITY Shield product line was specifically developed to meet the challenging requirements in military and security applications. The low profile / shark fin design ensures low visibility while still providing exceptional electrical performance in terms of horizontal gain and high power capabilities.

UHF/VHF antennas

UHF/VHF antennas

HUBER+SUHNER offers a broad range of ultra high frequency (UHF) / very high frequency (VHF) antennas suited for communication and ECM applications. This complementary range of antennas is designed for the bandwidth, power, and interoperability demands of contemporary applications.

QMA/QN

HUBER+SUHNER QMA and QN connectors have a quick-lock coupling mechanism. QMA and QN are easy to mate and allow a high packaging density because no tools are needed.

QMA

QMA

HUBER+SUHNER QMA coaxial connectors are in accordance with QLF standard and available with 50 ohm impedance. The frequency range extends to 18 GHz, depending on the connector and cable type. However most of the QMA connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the SMA dimension but instead of a threaded coupling mechanism a new snap-lock mechanism is used. The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, helping customers to save significantly time during production. The packaging density of QMA is increased compared to SMA connectors thanks to the fact that no torque spanner is required to fasten the coupling nut. QMA is not intermateable with SMA. QMA connectors are also available as waterproof version (IP68) and are compatible with QLF standard.

QN

QN

HUBER+SUHNER QN coaxial connectors are available with 50 ohm impedance. The frequency range extends to 11 GHz, depending on the connector and cable type, however most of the QN connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the inner dimensions of the N connector, but, instead of a threaded coupling mechanism, a snap-lock mechanism is used. The QN interface has a very similar performance to N, but in addition it offers an easier, faster and safe coupling operation, helping the customers to save significantly on time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimensions of QN are smaller than N, leading to the advantage that even TNC-size flanges can be used at QN connectors.

XQMA

XQMA

QMA eXtreme is the advanced version of the waterproof QMA, combining the quick-lock mechanism and waterproof properties also in rough environmental conditions. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperature.

XQN

XQN

Besides the outstanding characteristics of the quick-lock connector QN, this advanced version has some extra features. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the complete connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperatures. This extra features besides the excellent PIM performance (typical -162 dBc) and the optimum power performance (≈350 W by 2 GHz) makes this connector the ideal solution for antenna connections.

Fiber optic cable systems

HUBER+SUHNER is the global leader for remote radio installation solutions. We have a comprehensive offering of FTTA (fiber-to the-antenna), PTTA (power-to-the-antenna) and HTTA (hybrid-to-the-antenna) products, which are tailored to the customer’s needs. We advise operators about which installation methods are available and what their advantages are. We are experts on how to make savings on installation costs and how expensive follow-up costs can be saved. HUBER+SUHNER implements future-proof passive cable network infrastructures, which are compatible with all system vendor products and endure the future generations of active equipment.

MASTERLINE Extreme

MASTERLINE Extreme

Multi-riser cable with compact divider

MASTERLINE Extreme with Q-ODC-2 connectors is an efficient solution in terms of ease of installation, cost and required space on the mast. The compact divider minimises the wind-load and can be fed through small holes (80 mm diameter). The ruggedised push-pull connector Q-ODC allows the installer to connect the RRH jumper cables with a single "click", making it a genuine "plug & play" cabling system. MLE with Q-ODC is available to support up to 12 remote radios.
MASTERLINE Extreme with one Q-ODC-12 connector allows the installer to connect 6 RRH jumper cables with a single "click" and can even be installed through holes with a diameter of 20 mm. The Q-ODC-12 connector has the highest fiber density, based on the proven QN push-pull mating system and can connect 12 fibers in one mating step.
MASTERLINE Extreme is the preferred choice of network installers who require trouble free, reliable and efficient field deployments. HUBER+SUHNER`s MASTERLINE Extreme product family is unique in the market and provides the best value for money.

MASTERLINE Ultimate

MASTERLINE Ultimate

Multi-riser cable with compact connector head

MASTERLINE Ultimate is HUBER+SUHNER’s most innovative fiber optic cabling system for remote radio installations. The pre-connectorised factory-sealed fiber optic systems support up to 12 RRHs and connect the remote radios with easy-to-install Q-ODC fiber optic jumpers.

The robust connector head with an integrated pulling eye allows easy cable lifting without the need for hoisting grips. The encapsulated connector head can be directly attached to the mast with a single "click" at a pre-mounted adaptor plate. These unique features make MASTERLINE Ultimate the best-in-class product in terms of ease of mast-top installation, installation robustness and efficiency.

Fiber optic cables

HUBER+SUHNER offers a wide range of fiber optical cables, optimised for fix or mobile applications at indoor and outdoor areas. Due to new market demands innovative products are developed and tested in accordance with international standards, which fulfil high mechanical and thermal conditions as well as fire requirements.

Wires and cables

Providing cables that reliably transmit ever increasing volumes of data while meeting demaning market requirements is the greatest challenge for cable manufacturers. For this purpose, HUBER+SUHNER has included databus cables in its product range for different markets.

HUBER+SUHNER combines extensive expertise in data communication with electron-beam-cross-linked material technology. The databus cables developed in-house (pre-terminated on request) provide reliable solutions for use in high-temperature applications and harsh environmental conditions. The databuses fulfil the requirements of different markets due to their excellent mechanical and electrical characteristics.

Cat

Cat

MIL 4412 A1

MIL 4412 A1

Single core.

MIL 4412 E1

MIL 4412 E1

Single core - screened.

MIL 4412 E2

MIL 4412 E2

Screened pairs.

MIL 5932 A1

MIL 5932 A1

Single core.

MIL 5932 E1

MIL 5932 E1

Single core – screened.

MIL 5932 E2

MIL 5932 E2

Screened pairs.

VG 21

VG 21

Type C and type E.

VG 23

VG 23

Type F, multi core - screened.

VG 27

VG 27

Type B, multi core.

VG 28

VG 28

Type D and type A, multi core, screened.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238