Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
InnoTrans 2018
InnoTrans 2018

InnoTrans is the leading international trade fair for transport technology and takes places every two years in Berlin.
A unique feature of InnoTrans is its outdoor and track display area, where everything from tank wagons to high-speed trains are displayed on 3 500 metres of track.

18/9/2018 - 21/9/2018
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Plant and control room

Systems such as slide gates, the water level, the emergency release and the dam wall load must be controlled and monitored remotely for hydroelectric plants. Fiber optics are ideal for monitoring systems over large distances. HUBER+SUHNER supplies smart cabling solutions which significantly facilitate the installation of a communication network including fieldbus and enable data to be transmitted reliably in harsh environmental conditions. From a central station control point, the cables are installed to sub-control points and then further to various smart electronic devices. The plug-and-play system is used on site without any additional installation work and delivers cost-effective maintenance and service. In addition, the control centre of a power plant faces a number of challenges. A high volume of data must be processed and the complex interplay of producers, storage systems and consumers must ensure a perfect, uninterrupted energy supply. Reliable, bespoke products from HUBER+SUHNER provide suitable solutions for this purpose. Regardless of whether connectivity is required via radio frequency solutions or fiber optic-based systems, the wide product portfolio supports current and future applications.


 

Related Products

Quick lock connectors

HUBER+SUHNER QMA and QN connectors have a quick-lock coupling mechanism. QMA and QN are easy to mate and allow a high packaging density because no tools are needed.

QMA

QMA

HUBER+SUHNER QMA coaxial connectors are in accordance with QLF standard and available with 50 ohm impedance. The frequency range extends to 18 GHz, depending on the connector and cable type. However most of the QMA connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the SMA dimension but instead of a threaded coupling mechanism a new snap-lock mechanism is used. The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, helping customers to save significantly time during production. The packaging density of QMA is increased compared to SMA connectors thanks to the fact that no torque spanner is required to fasten the coupling nut. QMA is not intermateable with SMA. QMA connectors are also available as waterproof version (IP68) and are compatible with QLF standard.

QMA eXtreme – XQMA

QMA eXtreme – XQMA

QMA eXtreme is the advanced version of the waterproof QMA, combining the quick-lock mechanism and waterproof properties also in rough environmental conditions. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperature.

QN

QN

HUBER+SUHNER QN coaxial connectors are available with 50 ohm impedance. The frequency range extends to 11 GHz, depending on the connector and cable type, however most of the QN connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the inner dimensions of the N connector, but, instead of a threaded coupling mechanism, a snap-lock mechanism is used. The QN interface has a very similar performance to N, but in addition it offers an easier, faster and safe coupling operation, helping the customers to save significantly on time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimensions of QN are smaller than N, leading to the advantage that even TNC-size flanges can be used at QN connectors.

QN eXtreme – XQN

QN eXtreme – XQN

Besides the outstanding characteristics of the quick-lock connector QN, this advanced version has some extra features. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the complete connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperatures. This extra features besides the excellent PIM performance (typical -162 dBc) and the optimum power performance (≈350 W by 2 GHz) makes this connector the ideal solution for antenna connections.

Databus cables

Providing cables that reliably transmit ever increasing volumes of data while meeting demaning market requirements is the greatest challenge for cable manufacturers. For this purpose, HUBER+SUHNER has included databus cables in its product range for different markets.

HUBER+SUHNER combines extensive expertise in data communication with electron-beam-cross-linked material technology. The databus cables developed in-house (pre-terminated on request) provide reliable solutions for use in high-temperature applications and harsh environmental conditions. The databuses fulfil the requirements of different markets due to their excellent mechanical and electrical characteristics.

RADOX DATABUS 120 OHM nx0.5 XM S

RADOX DATABUS 120 OHM nx0.5 XM S

Databus cable with defined impedance for the use in rolling stock applications.

RADOX DATABUS 120 OHM nx0.5 XM S EN

RADOX DATABUS 120 OHM nx0.5 XM S EN

Databus cable with defined impedance for the use in rolling stock applications.

RADOX DATABUS 120 OHM nx0.75 XM S

RADOX DATABUS 120 OHM nx0.75 XM S

Databus cable with defined impedance for the use in rolling stock applications.

RADOX DATABUS 120 OHM nx0.75 XM S EN

RADOX DATABUS 120 OHM nx0.75 XM S EN

Databus cable with defined impedance for the use in rolling stock applications.

RADOX RAILCAT CAT5e

RADOX RAILCAT CAT5e

Halogen free electron beam cross linked cables with improved behaviour in case of fire, easy to strip, soldering iron resistant and flexible. They comply with the requirements of standard EN 50288-2-2 and substantive fire safety requirements.

RADOX RAILCAT CAT7 4x(2x24AWG)  XM S

RADOX RAILCAT CAT7 4x(2x24AWG) XM S

RADOX® RAILCAT CAT7, a databus cable for ethernet network connections of up to 10 gigabits. The 4-pair cable, specially developed for the railway market, fulfils its demanding environmental requirements and fire protection specifications in line with DIN 5510-2 and EN 45545-2 and NF F 16-101.

Fiber Optic connectors and adapters

HUBER+SUHNER offers a wide range of fiber optic connectors optimised for both indoor and outdoor applications. Customer-specific connectors are also available in addition to a comprehensive standard product portfolio. In response to the rapid increase in requirements on different markets, HUBER+SUHNER develops innovative products tested in accordance with international standards. All fiber optic connectors meet the highest mechanical and thermal specifications.

FC portfolio

FC portfolio

FC was one of the first established standards in the fiber optic market with physical contact. The FC is often used in military application because of its screwed locking mechanism.

LC portfolio

LC portfolio

The LC connector is established because of its small size and its very reliable connecting quality. In the last five years it has become the most popular connector in the world. To match the different customer needs, HUBER+SUHNER has enhanced the portfolio consistently. The HUBER+SUHNER LC-XD is taking the LC to a completely new level in packing density and handling.

LSH (E-2000) components

LSH (E-2000) components

E-2000 is a high performance connector which meets the highest standards by excellence in design and manufacturing processes. Only high quality and high precision materials are used to guarantee connections at the highest level. HUBER+SUHNER E-2000 products meet the international standards IEC 61754-15 and TIA 604-16 and are naturally RoHS/REACH compliant.

SC components

SC components

SC is one of the most common product for reliable networks and is therefor globally used. With its one-piece design, it also provides an easy termination. Handling is comfortable due to its push-pull mechanism.

Fiber Optic cables

HUBER+SUHNER offers a wide range of fiber optical cables, optimised for fix or mobile applications at indoor and outdoor areas. Due to new market demands innovative products are developed and tested in accordance with international standards, which fulfil high mechanical and thermal conditions as well as fire requirements.

LISA - front access fiber management systems

The LISA front access system is focused on speed of installation and network security during installation or maintenance. The LISA front access system represents a modular group of products that enables seamless connection of passive optical networks especially in central office environments. Reliability and performance are key to the success of our industry which is why we have ensured that the highest level of fiber protection and bend-radius limitation are standard across all front access system solutions. The center piece of the front access system is a unique and versatile compact module that can be used for pigtail, direct cable splicing or for the integration of pre-connectorised passive components such as splitters.

LISA compact modules for MultiCircuit (MCM) applications combine simple installation and maximum security within an optical network. An integrated loose tube storage facility in each module allows easy removal of the splicing machine without disturbing neighbouring modules. In telecommunication environments, the compact module is particularly suitable for simple physical connections between the equipment and the passive infrastructure by means of inter-connect or cross-connect.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238