Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
DesignCon
DesignCon

At the the premier conference for chip, board and systems design engineers in the high speed communications and semiconductor communities HUBER+SUHNER will present its newest additions to the well-know connectivity portfolio.

31/1/2018 - 1/2/2018
English

Wind park communication

Reliable, high-quality communication systems are essential for operating wind turbines. All HUBER+SUHNER components and systems meet the high safety and environmental requirements of the wind energy industry.  The systems for wind turbines are exposed to harsh conditions, including extreme temperatures, oil, lubricants and torsion stresses. It must also be possible to control and monitor the systems remotely. HUBER+SUHNER products have been specially tailored to meet these challenges and guarantee successful data transmission even in harsh environmental conditions. Our products have a longstanding reputation for their easy handling, long service life and cost-effective installation and operation.

Recommended Products

Cellular antennas

HUBER+SUHNER is offering a wide range of unobstrusive and easy to install wideband antennas for distributed antenna systems.

SENCITY® Avant

SENCITY® Avant

Broadband omni-directional antenna with small form factor for indoor DAS.

SENCITY® Bell

SENCITY® Bell

Omni-directional multi-band antenna for indoor DAS.

SENCITY® Cube

SENCITY® Cube

Directional MiMo or SiSo antenna for indoor DAS.

SENCITY® Optima

SENCITY® Optima

Ultra-broadband antenna with low profile for indoor DAS.

SENCITY® Rondo

SENCITY® Rondo

MiMo and SiSo antenna with attractive design and five different mounting options for indoor DAS.

SENCITY® Ultra

SENCITY® Ultra

Small form factor indoor DAS antenna for private and public security and LTE networks.

WIFI antennas

HUBER+SUHNER develops and produces robust, small form factor antennas for various industrial applications.

SENCITY® Embedded

SENCITY® Embedded

Omni-directional dual-band WLAN / WiFi / cellular / LTE antenna for wireless device integration.

SENCITY® Omni-L DECT stick

SENCITY® Omni-L DECT stick

Omni-directional stick antenna for DECT applications.

SENCITY® Omni-M stick

SENCITY® Omni-M stick

Omni-directional stick antenna for harsh industrial environment or DAS applications.

SENCITY® Omni-S

SENCITY® Omni-S

Vandalism-proof omni-directional antenna for outdoor and indoor applications. The product can be configured to specific needs.

SENCITY® Omni-S SC

SENCITY® Omni-S SC

Vandalism-proof low profile multiband MiMo antenna optimised for small cell applications.

SENCITY® Omni-S stick

SENCITY® Omni-S stick

Omni-directional WiFi/multiband stick antenna for harsh industrial environment or DAS applications.

SENCITY® Spot-L sector

SENCITY® Spot-L sector

Directional high gain WLAN / WiFi / ISM band antenna for indoor and outdoor applications.

SENCITY® Spot-M

SENCITY® Spot-M

Directional high gain WLAN / WiFi / ISM band antenna for indoor and outdoor applications.

SENCITY® Spot-M Yagi

SENCITY® Spot-M Yagi

Directional high gain WLAN / WiFi antenna for railway trackside and tunnel applications.

SENCITY® Spot-S

SENCITY® Spot-S

Small, directional medium gain WLAN / WiFi / ISM / cellular band antenna. Variants available optimised for harsh industrial, railway or indoor environment.

SENCITY® Spot-S Indoor

SENCITY® Spot-S Indoor

Small, directional medium gain WLAN/ WiFi / DECT / cellular band antenna.

Vehicle antennas

HUBER+SUHNER is offering various antennas for trains and buses that transmit signals perfectly within the vehicle and along the track.

SENCITY® Rail

SENCITY® Rail

Omni-directional railway roof-top antenna family for all types of trains. Designed to meet the special requirements of railway applications including high current and high voltage protection.

SENCITY® Rail Excel

SENCITY® Rail Excel

Directional railway roof-top antenna family for all types of trains. Designed to meet the special requirements of railway applications including high current and high voltage protection.

SENCITY® Road

SENCITY® Road

Vehicle roof-top antenna family for heavy-duty, bus and LRV/Metro. Provides several antenna elements in one compact housing.

Splitters and Dividers

Reactive splitters

Reactive splitters

Low loss reactive splitters are used to distribute RF signals to multiple transceiver antennas or radiating cables. The RF power is evenly split to all outputs with excellent amplitude and phase balance. Only the common port is matched to 50 ohms. The broad range of reactive power splitters supports cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Reactive power splitters are available with N, 7/16 and 4.3-10 interfaces.

Resistive power dividers

Resistive power dividers

Power dividers are designed to split a RF signal equally into two output signals with an insertion loss of 6 dB.

Wilkinson splitters

Wilkinson splitters

The HUBER+SUHNER series of broadband Wilkinson type combiners/splitters is ideally suited for equally combining or dividing low power multi-carrier/multi-operator signals. Each input and output port is matched to 50 ohms. The frequency range covers 380 or 698 to 2700 MHz. The Wilkinson splitters support cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Wilkinson splitters are available with an N interface.

Filters and couplers

Filters

Filters

HUBER+SUHNER provides a portfolio of RF filters that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Our standard product portfolio comprises diplexers and multiplexers for mobile communication and transportation applications, the majority of which are ideally suited for in-building coverage solutions. Several railway-qualified products complete the portfolio. Filters are available with N and 7/16 interfaces.

Directional couplers

Directional couplers

HUBER+SUHNER’s broadband directional coupler portfolio is designed for indoor applications and covers the frequency range from 380 or 689 to 2700 MHz. This extremely wide frequency range allows for use with multiband antennas, leaky cable systems and wireless base stations for cellular, WiFi 2.4 GHz and TETRA security networks. The couplers are ideally suited for multi-carrier/multi-operator coupling and combiner networks. Directional couplers are available with N and 4.3-10 interfaces.

Hybrid couplers

Hybrid couplers

The HUBER+SUHNER series of broadband hybrid and hybrid matrix couplers are ideally suited for equally combining multi-carrier/multi-operator systems. They enable the equal division or combination of two signals in the cellular and WiFi 2.4 GHz wireless bands. The remaining outputs need to be terminated with a suitable 50 ohm termination. A 2x1 hybrid coupler with integrated cable load is also available. Hybrid couplers are available with N, 7/16 and 4.3-10 interfaces.

Impedance matching pad

Impedance matching pad

Matching pads are designed to match 50 ohm with 75 ohm impedance of two different transmission lines of while preserving signal integrity.

Tappers

Tappers

This series of HUBER+SUHNER tappers unevenly splits high power cellular signals in fixed ratios from 1000:1 to 2:1. It covers the entire spectrum from 350 to 5850 MHz. Tappers are widely used in multi-band/multi-operator in-building systems that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Tappers are available with N and 4.3-10 interfaces.

Coaxial inserts

HUBER+SUHNER coaxial inserts 1.0/2.3 are suitable for the insertion of layout connectors DIN 41612 (pattern M). These inserts feature a slide-on coupling mechanism suitable for applications up to 4 GHz.

QLA

QLA

QLA 00 series contains connectors with a quick latch coupling mechanism: connection is achieved by simply pushing the plug into the jack. Three latching springs automatically engage, thereby securing the mated connectors against axial forces. No twisting action is required. The connectors are easily released by slightly pulling back the outer sleeve of the plug. This coupling mechanism provides a fast and reliable connection for applications up to 1.4 GHz. All connectors of the series QLA 00 are without any restrictions intermateable with Lemo series 00.250.

Quick lock connectors

HUBER+SUHNER QMA and QN connectors have a quick-lock coupling mechanism. QMA and QN are easy to mate and allow a high packaging density because no tools are needed.

QMA

QMA

HUBER+SUHNER QMA coaxial connectors are in accordance with QLF standard and available with 50 ohm impedance. The frequency range extends to 18 GHz, depending on the connector and cable type. However most of the QMA connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the SMA dimension but instead of a threaded coupling mechanism a new snap-lock mechanism is used. The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, helping customers to save significantly time during production. The packaging density of QMA is increased compared to SMA connectors thanks to the fact that no torque spanner is required to fasten the coupling nut. QMA is not intermateable with SMA. QMA connectors are also available as waterproof version (IP68) and are compatible with QLF standard.

QMA eXtreme – XQMA

QMA eXtreme – XQMA

QMA eXtreme is the advanced version of the waterproof QMA, combining the quick-lock mechanism and waterproof properties also in rough environmental conditions. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperature.

QN

QN

HUBER+SUHNER QN coaxial connectors are available with 50 ohm impedance. The frequency range extends to 11 GHz, depending on the connector and cable type, however most of the QN connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the inner dimensions of the N connector, but, instead of a threaded coupling mechanism, a snap-lock mechanism is used. The QN interface has a very similar performance to N, but in addition it offers an easier, faster and safe coupling operation, helping the customers to save significantly on time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimensions of QN are smaller than N, leading to the advantage that even TNC-size flanges can be used at QN connectors.

QN eXtreme – XQN

QN eXtreme – XQN

Besides the outstanding characteristics of the quick-lock connector QN, this advanced version has some extra features. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the complete connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperatures. This extra features besides the excellent PIM performance (typical -162 dBc) and the optimum power performance (≈350 W by 2 GHz) makes this connector the ideal solution for antenna connections.

Bayonet connectors

HUBER+SUHNER BNC is a popular connector series featuring a two stud bayonet coupling mechanism, which is particularly useful for frequently coupled and uncoupled RF connections with frequencies up to 4 GHz. BNC connectors are available for 50 ohm and 75 ohm applications.

BNC 50 Ω

BNC 50 Ω

HUBER+SUHNER BNC 50 ohm features a two stud bayonet coupling mechanism, which is particularly useful for frequently coupled and uncoupled RF connections with frequencies up to 4 GHz.

Threaded connectors

HUBER+SUHNER TNC connectors are threaded RF connectors applicable from DC up to 11 GHz. 50 ohm TNC and 75 ohm TNC connectors are intermateable without restrictions.

TNC 50 Ω

TNC 50 Ω

HUBER+SUHNER TNC connectors are threaded RF connectors applicable from DC up to 11 GHz. The threaded coupling mechanism improves control over the interface dimensions and allows them to be used under a higher environmental load than BNC, especially under a high vibration load.

TNC 75 Ω

TNC 75 Ω

Within the internationally standardised TNC mating face dimensions a perfect 75 ohm characteristic impedance cannot be realised. However, at frequencies up to 1 GHz the small impedance deviation is negligible for practical applications. The threaded coupling mechanism allows them to be used under higher environmental load than BNC.

RF adapters

HUBER+SUHNER is offering a wide range of adapters in various configurations like within series or between series, straight or angled designs and some with panel mount features. Adapters can also be custom designed in accordance with your application specific requirements.

Precision adaptors

Precision adaptors

HUBER+SUHNER precision adapter assortment focuses on performance for accurate RF measurements.

Standard adaptors

Standard adaptors

HUBER+SUHNER standard adapter assortment offers a wide range of products to realise transitions from one interconnection interface to another. Our RF adapter assortment covers all commercially available RF interfaces and configurations.

Foam radio frequency cables

The product series Spuma, S and SX provide lowest attenuation, high flexibility and optimal shielding. Products from the Spuma series are similar to the LMR® products from Times Microwave. The series with LSFH jacket material and the radiation crosslinked SX series with the RADOX® jacket offer extremely high flame protection.

S cables

S cables

HUBER+SUHNER low loss coaxial cables with foamed PE dielectric have been carefully designed for excellent electrical performance focusing on low loss, high velocity, high power and low VSWR. These flexible coaxial cables feature greatly improved cable bending characteristics, which make them ideal for use in limited spaces and where multiple bends are required. Ideal for use in critical antenna system applications.

Spuma

Spuma

The Spuma product family provides flexible and halogen free cable types and stands for its extremely low loss. With a screening effectiveness > 90 dB over the whole operating frequency range, as well as a tight bending radius, is a wide application range covered. These cables offer excellent electrical performance, especially an outstanding return loss (VSWR). Spuma cables are designed for applications up to 6 GHz and offer great opportunities in applications like industrial, railway, defense and communication.

SX cables

SX cables

HUBER+SUHNER cross-linking technology in combination with low loss dielectrics makes this product portfolio outstanding. Cross-linking allows the maximum application temperature of polyethylene to be increased from +85 to +105 °C. This extended range covers most applications. It allows operation in a higher power range, and connectors with soldered inner conductors can be easily applied.

Performance radio frequency cables

The PTFE/FEP cables of our RG/K series are designed for applications up to 200 °C and are characterised by low losses, especially at high frequencies. The Enviroflex cables do not contain fluorine plastics either in the dielectric nor in the jacket and thus provide a robust and environmentally friendly option.

Enviroflex series

Enviroflex series

The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.

RG/K series

RG/K series

HUBER+SUHNER high temperature coax cables are designed for applications up to 200 °C, depending on the material selection of the cable. Cable types out of this portfolio provide lowest loss especially at high frequency thanks to PTFE dielectric material.

Gas discharge tube (GDT) protectors

HUBER+SUHNER gas discharge tube (GDT) technology based protectors are generally designed as coaxial feed-through devices for 50 or 75 ohm systems. GDT technology based protectors feature DC/AC continuity for remote powering and large bandwidth.

3401/3402 gas discharge tube protectors

3401/3402 gas discharge tube protectors

Standard versions for applications with RF and DC components on the antenna line. The standard GDT lightning / EMP protectors feature DC continuity and large bandwidth. Most HUBER+SUHNER GDT protector designs also offer excellent performance in NEMP applications. For specific applications internally DC-blocked GDT protectors are also available.

3406 true broadband GDT protectors, slim line gas discharge tube (GDT) technology

3406 true broadband GDT protectors, slim line gas discharge tube (GDT) technology

HUBER+SUHNER 3406 slimline protectors provide surge protection for any electronic equipment connected to coaxial lines up to 6 GHz. The gas discharge tube protection principle supports simultaneous transmission of RF, data and DC. The gas discharge tubes are fix integrated. The protectors can handle any induced surge signals but partial lightning current up to the specified current handling capability only. For higher lightning current handling refer to our gas discharge tube (GDT) protector series 3401 and 3402. Multi-carrier applications with high RF peak power and special passive intermodulation requirements are covered by series 3409.

3408 gas discharge tube (GDT) technology with integrated high-pass filter

3408 gas discharge tube (GDT) technology with integrated high-pass filter

HUBER+SUHNER gas discharge tube (GDT) protectors with integrated high-pass filter feature an added useful RF component to the proven standard GDT protectors. Thus, they offer a much better protection performance. The design allows a DC injection facility to be integrated as well. Gas discharge tubes can be easily exchanged for new operation conditions or replaced in the case of a necessary service.

3409 high-power/low-IM gas discharge tube (GDT) hybrid technology

3409 high-power/low-IM gas discharge tube (GDT) hybrid technology

HUBER+SUHNER series 3409 high-power gas discharge tube (GDT) protectors are a new generation of ultimate GDT protectors – suitable to meet the demanding high RF performance and protection requirements of future mobile communications transceivers with DC powering of outdoor equipment. The customer is freed from any RF power and IM performance considerations. Thus the protectors are especially suitable for multicarrier systems. The availability of this kind of GDT protectors concerning frequency range is not limited by the gas discharge tube (as it is the case with standard GDT protectors which are limited to applications below about 3 GHz). In addition, the protection performance is superior to existing standard GDT protectors.

Databus cables

Providing cables that reliably transmit ever increasing volumes of data while meeting demaning market requirements is the greatest challenge for cable manufacturers. For this purpose, HUBER+SUHNER has included databus cables in its product range for different markets.

HUBER+SUHNER combines extensive expertise in data communication with electron-beam-cross-linked material technology. The databus cables developed in-house (pre-terminated on request) provide reliable solutions for use in high-temperature applications and harsh environmental conditions. The databuses fulfil the requirements of different markets due to their excellent mechanical and electrical characteristics.

120Ohm

120Ohm

RADOX® Databus 120 Ohm XM S EN meets the demanding requirements of fire safety standards EN 45545-2.

CAT

CAT

Fiber Optic connectors and adapters

HUBER+SUHNER offers a wide range of fiber optic connectors optimised for both indoor and outdoor applications. Customer-specific connectors are also available in addition to a comprehensive standard product portfolio. In response to the rapid increase in requirements on different markets, HUBER+SUHNER develops innovative products tested in accordance with international standards. All fiber optic connectors meet the highest mechanical and thermal specifications.

FC portfolio

FC portfolio

FC was one of the first established standards in the fiber optic market with physical contact. The FC is often used in military application because of its screwed locking mechanism.

LC portfolio

LC portfolio

The LC connector is established because of its small size and its very reliable connecting quality. In the last five years it has become the most popular connector in the world. To match the different customer needs, HUBER+SUHNER has enhanced the portfolio consistently. The HUBER+SUHNER LC-XD is taking the LC to a completely new level in packing density and handling.

LSH (E-2000) components

LSH (E-2000) components

E-2000 is a high performance connector which meets the highest standards by excellence in design and manufacturing processes. Only high quality and high precision materials are used to guarantee connections at the highest level. HUBER+SUHNER E-2000 products meet the international standards IEC 61754-15 and TIA 604-16 and are naturally RoHS/REACH compliant.

SC components

SC components

SC is one of the most common product for reliable networks and is therefor globally used. With its one-piece design, it also provides an easy termination. Handling is comfortable due to its push-pull mechanism.

Fiber Optic cables

HUBER+SUHNER offers a wide range of fiber optical cables, optimised for fix or mobile applications at indoor and outdoor areas. Due to new market demands innovative products are developed and tested in accordance with international standards, which fulfil high mechanical and thermal conditions as well as fire requirements.

LISA - front access fiber management systems

The LISA front access system is focused on speed of installation and network security during installation or maintenance. The LISA front access system represents a modular group of products that enables seamless connection of passive optical networks especially in central office environments. Reliability and performance are key to the success of our industry which is why we have ensured that the highest level of fiber protection and bend-radius limitation are standard across all front access system solutions. The center piece of the front access system is a unique and versatile compact module that can be used for pigtail, direct cable splicing or for the integration of pre-connectorised passive components such as splitters.

LISA compact modules for MultiCircuit (MCM) applications combine simple installation and maximum security within an optical network. An integrated loose tube storage facility in each module allows easy removal of the splicing machine without disturbing neighbouring modules. In telecommunication environments, the compact module is particularly suitable for simple physical connections between the equipment and the passive infrastructure by means of inter-connect or cross-connect.

Street cabinet solutions

Street cabinets are metal or plastic housings placed above ground often on pedestrian pathways. They enable a relatively easy and rapid access to fiber circuits and can handle large fiber capacities. In many ways, they can offer ODF type of flexibility. Street cabinets are often used to terminate larger feeder cables and manage distribution cabling including microducts for blown fiber and/or subscriber drop connections.

Street cabinets also store splitter devices in PON architectures and allow flexible splicing and/or patching for customer-dedicated fibers. Very often they also house active equipment to support Vectoring and G.fast services over copper. Street cabinets need to be secure and strongly built to withstand vandal attacks and traffic accidents.

Street cabinets - smart cabins

Street cabinets - smart cabins

The Smart cabin series is developed and manufactured with the German market leader SICHERT GmbH. SICHERT outdoor enclosures made of glass fiber-reinforced polycarbonate meet the highest standards and have been used successfully for decades. With more than 180 000 outdoor enclosures installed in Germany alone, SICHERT counts among the leading providers and specialists in the outdoor enclosure housing technology sector. HUBER+SUHNER is your partner for safe and reliable FTTx networks. The experience we have gained in the central office area of the network has been integrated into our street cabinet offering .

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238
HUBER+SUHNER Inc.
Mr. Axel Vega
Regional Sales Director, RF Division
  +1 866 482 3778
  +1 704 587 1238