Support
CISCOLive!
CISCOLive!

For the first time HUBER+SUHNER will present its fibermanagement solutions at Cisco Live in Barcelona. The Cisco’s annual customer conference is one of the most important events to build the foundation for the digital future.

28/1/2019 - 1/2/2019
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Wireless/cellular connectivity

Wireless connectivity has become essential in various industries, but building a long-lasting, reliable wireless network that provides good coverage requires reliable products that adhere to specific requirements. Depending on the actual installation position and operation mode, requirements include specific antenna parameters and mechanical properties such as water tightness, salt water and spray resistance, shock and vibration resistance.

These considerations apply not only to the wireless infrastructure, but also to machines connected to the network. Since machines are able to connect to different networks, antenna requirements increase, specifically for bandwidth and bands, which may include frequencies for Wi-Fi, cellular (2G, 3G, 4G, 5G), GNSS (GPS), Tetra, LPWA (low-power wide-area networks), and others.

Antenna cabling normally has a focus on easy installation, flexibility, low losses and fulfilling environmental requirements, including water tightness, oil and radiation resistance.

Lightning protectors are also available from the HUBER+SUHNER portfolio, allowing for additional protection of the active equipment. This way, the whole analog path from the access point’s antenna port to the antenna to be covered with HUBER+SUHNER products.

Related Products

Cellular antennas

HUBER+SUHNER is offering a wide range of unobstrusive and easy to install wideband antennas for distributed antenna systems.

SENCITY® Avant

SENCITY® Avant

Broadband omni-directional antenna with small form factor for indoor DAS.

SENCITY® Cube

SENCITY® Cube

Directional MiMo or SiSo antenna for indoor DAS.

SENCITY® Optima

SENCITY® Optima

Ultra-broadband antenna with low profile for indoor DAS.

SENCITY® Rondo

SENCITY® Rondo

MiMo and SiSo antenna with attractive design and five different mounting options for indoor DAS.

SENCITY® Ultra

SENCITY® Ultra

Small form factor indoor DAS antenna for private and public security and LTE networks.

WIFI antennas

HUBER+SUHNER develops and produces robust, small form factor antennas for various industrial applications.

SENCITY® Embedded

SENCITY® Embedded

Omni-directional dual-band WLAN / WiFi / cellular / LTE antenna for wireless device integration.

SENCITY® Omni-L DECT stick

SENCITY® Omni-L DECT stick

Omni-directional stick antenna for DECT applications.

SENCITY® Omni-M stick

SENCITY® Omni-M stick

Omni-directional stick antenna for harsh industrial environment or DAS applications.

SENCITY® Omni-S

SENCITY® Omni-S

Vandalism-proof omni-directional antenna for outdoor and indoor applications. The product can be configured to specific needs.

SENCITY® Omni-S SC

SENCITY® Omni-S SC

Vandalism-proof low profile multiband MiMo antenna optimised for small cell applications.

SENCITY® Omni-S stick

SENCITY® Omni-S stick

Omni-directional WiFi/multiband stick antenna for harsh industrial environment or DAS applications.

SENCITY® Spot-L

SENCITY® Spot-L

Directional high gain WLAN / WiFi / ISM band antenna for indoor and outdoor applications.

SENCITY® Spot-L sector

SENCITY® Spot-L sector

Directional high gain WLAN / WiFi / ISM band antenna for indoor and outdoor applications.

SENCITY® Spot-M

SENCITY® Spot-M

Directional high gain WLAN / WiFi / ISM band antenna for indoor and outdoor applications.

SENCITY® Spot-M Yagi

SENCITY® Spot-M Yagi

Directional high gain WLAN / WiFi antenna for railway trackside and tunnel applications.

SENCITY® Spot-S

SENCITY® Spot-S

Small, directional medium gain WLAN / WiFi / ISM / DECT / cellular band antenna. Variants available optimised for harsh industrial, railway or indoor environment.

SENCITY® Spot-S Indoor

SENCITY® Spot-S Indoor

Small, directional medium gain WLAN/ WiFi / DECT / cellular band antenna.

Vehicle antennas

HUBER+SUHNER is offering various antennas for trains and buses that transmit signals perfectly within the vehicle and along the track.

SENCITY® Rail

SENCITY® Rail

Omni-directional railway roof-top antenna family for all types of trains. Designed to meet the special requirements of railway applications including high current and high voltage protection.

SENCITY® Rail Excel

SENCITY® Rail Excel

Directional railway roof-top antenna family for all types of trains. Designed to meet the special requirements of railway applications including high current and high voltage protection.

SENCITY® Road

SENCITY® Road

Vehicle roof-top antenna family for heavy-duty, bus and LRV/Metro. Provides several antenna elements in one compact housing.

Quick-lock connectors

HUBER+SUHNER QMA and QN connectors have a quick-lock coupling mechanism. QMA and QN are easy to mate and allow a high packaging density because no tools are needed.

QMA

QMA

HUBER+SUHNER QMA coaxial connectors are in accordance with QLF standard and available with 50 ohm impedance. The frequency range extends to 18 GHz, depending on the connector and cable type. However most of the QMA connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the SMA dimension but instead of a threaded coupling mechanism a new snap-lock mechanism is used. The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, helping customers to save significantly time during production. The packaging density of QMA is increased compared to SMA connectors thanks to the fact that no torque spanner is required to fasten the coupling nut. QMA is not intermateable with SMA. QMA connectors are also available as waterproof version (IP68) and are compatible with QLF standard.

XQMA - QMA extreme

XQMA - QMA extreme

QMA eXtreme is the advanced version of the waterproof QMA, combining the quick-lock mechanism and waterproof properties also in rough environmental conditions. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperature.

QN

QN

HUBER+SUHNER QN coaxial connectors are available with 50 ohm impedance. The frequency range extends to 11 GHz, depending on the connector and cable type, however most of the QN connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the inner dimensions of the N connector, but, instead of a threaded coupling mechanism, a snap-lock mechanism is used. The QN interface has a very similar performance to N, but in addition it offers an easier, faster and safe coupling operation, helping the customers to save significantly on time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimensions of QN are smaller than N, leading to the advantage that even TNC-size flanges can be used at QN connectors.

XQN - QN extreme

XQN - QN extreme

Besides the outstanding characteristics of the quick-lock connector QN, this advanced version has some extra features. The coupling mechanism is completely waterproof and not only the RF signal path, thus protecting the complete connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperatures. This extra features besides the excellent PIM performance (typical -162 dBc) and the optimum power performance (≈350 W by 2 GHz) makes this connector the ideal solution for antenna connections.

Splitters and dividers

Reactive splitters

Reactive splitters

Low loss reactive splitters are used to distribute RF signals to multiple transceiver antennas or radiating cables. The RF power is evenly split to all outputs with excellent amplitude and phase balance. Only the common port is matched to 50 ohms. The broad range of reactive power splitters supports cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Reactive power splitters are available with N, 7/16 and 4.3-10 interfaces.

Resistive power dividers

Resistive power dividers

Power dividers are designed to split a RF signal equally into two output signals with an insertion loss of 6 dB.

Wilkinson splitters

Wilkinson splitters

The HUBER+SUHNER series of broadband Wilkinson type combiners/splitters is ideally suited for equally combining or dividing low power multi-carrier/multi-operator signals. Each input and output port is matched to 50 ohms. The frequency range covers 380 or 698 to 2700 MHz. The Wilkinson splitters support cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Wilkinson splitters are available with an N interface.

Filters and couplers

Filters

Filters

HUBER+SUHNER provides a portfolio of RF filters that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Our standard product portfolio comprises diplexers and multiplexers for mobile communication and transportation applications, the majority of which are ideally suited for in-building coverage solutions. Several railway-qualified products complete the portfolio. Filters are available with N and 7/16 interfaces.

Directional couplers

Directional couplers

HUBER+SUHNER’s broadband directional coupler portfolio is designed for indoor applications and covers the frequency range from 380 or 689 to 2700 MHz. This extremely wide frequency range allows for use with multiband antennas, leaky cable systems and wireless base stations for cellular, WiFi 2.4 GHz and TETRA security networks. The couplers are ideally suited for multi-carrier/multi-operator coupling and combiner networks. Directional couplers are available with N and 4.3-10 interfaces.

Hybrid couplers

Hybrid couplers

The HUBER+SUHNER series of broadband hybrid and hybrid matrix couplers are ideally suited for equally combining multi-carrier/multi-operator systems. They enable the equal division or combination of two signals in the cellular and WiFi 2.4 GHz wireless bands. The remaining outputs need to be terminated with a suitable 50 ohm termination. A 2x1 hybrid coupler with integrated cable load is also available. Hybrid couplers are available with N, 7/16 and 4.3-10 interfaces.

Impedance matching pad

Impedance matching pad

Matching pads are designed to match 50 ohm with 75 ohm impedance of two different transmission lines of while preserving signal integrity.

Tappers

Tappers

This series of HUBER+SUHNER tappers unevenly splits high power cellular signals in fixed ratios from 1000:1 to 2:1. It covers the entire spectrum from 350 to 5850 MHz. Tappers are widely used in multi-band/multi-operator in-building systems that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Tappers are available with N and 4.3-10 interfaces.

Gas discharge tube (GDT) protectors

HUBER+SUHNER gas discharge tube (GDT) technology based protectors are generally designed as coaxial feed-through devices for 50 or 75 ohm systems. GDT technology based protectors feature DC/AC continuity for remote powering and large bandwidth.

3401/3402 gas discharge tube protectors

3401/3402 gas discharge tube protectors

Standard versions for applications with RF and DC components on the antenna line. The standard GDT lightning / EMP protectors feature DC continuity and large bandwidth. Most HUBER+SUHNER GDT protector designs also offer excellent performance in NEMP applications. For specific applications internally DC-blocked GDT protectors are also available.

3403 fine protector hybrid technology

3403 fine protector hybrid technology

HUBER+SUHNER fine protectors are a very special group of lightning EMP protectors which provide a very high degree of protection, especially for applications with DC powering via coaxial cable. They offer an extremely effective surge pulse reduction, which makes them suitable to protect even very sensitive microelectronic circuits, e.g. GPS timing systems for CDMA mobile communication systems.
 

3404 miniature gas discharge tube (GDT) technology

3404 miniature gas discharge tube (GDT) technology

HUBER+SUHNER miniature gas discharge tube protectors are designed to protect against NEMP (Nuclear Electromagnetic Pulse) and other electromagnetic interferences. The special design guarantees an excellent dynamic protection performance. It includes a fixed integrated gas discharge tube. Miniature GDT protectors have a bulkhead feed-through design and can be easily installed instead of a standard waterproof bulkhead coaxial connector to harden existing equipment. Different or additional protectors need to be applied for lightning protection.

3406 true broadband GDT protectors, slim line gas discharge tube (GDT) technology

3406 true broadband GDT protectors, slim line gas discharge tube (GDT) technology

HUBER+SUHNER 3406 slimline protectors provide surge protection for any electronic equipment connected to coaxial lines up to 6 GHz. The gas discharge tube protection principle supports simultaneous transmission of RF, data and DC. The gas discharge tubes are fix integrated. The protectors can handle any induced surge signals but partial lightning current up to the specified current handling capability only. For higher lightning current handling refer to our gas discharge tube (GDT) protector series 3401 and 3402. Multi-carrier applications with high RF peak power and special passive intermodulation requirements are covered by series 3409.

3408 gas discharge tube (GDT) technology with integrated high-pass filter

3408 gas discharge tube (GDT) technology with integrated high-pass filter

HUBER+SUHNER gas discharge tube (GDT) protectors with integrated high-pass filter feature an added useful RF component to the proven standard GDT protectors. Thus, they offer a much better protection performance. The design allows a DC injection facility to be integrated as well. Gas discharge tubes can be easily exchanged for new operation conditions or replaced in the case of a necessary service.

3409 high-power/low-IM gas discharge tube (GDT) hybrid technology

3409 high-power/low-IM gas discharge tube (GDT) hybrid technology

HUBER+SUHNER series 3409 high-power gas discharge tube (GDT) protectors are a new generation of ultimate GDT protectors – suitable to meet the demanding high RF performance and protection requirements of future mobile communications transceivers with DC powering of outdoor equipment. The customer is freed from any RF power and IM performance considerations. Thus the protectors are especially suitable for multicarrier systems. The availability of this kind of GDT protectors concerning frequency range is not limited by the gas discharge tube (as it is the case with standard GDT protectors which are limited to applications below about 3 GHz). In addition, the protection performance is superior to existing standard GDT protectors.

Semper – self-extinguishing gas discharge tube (GDT) protector

Semper – self-extinguishing gas discharge tube (GDT) protector

The patented Semper concept enhances the safety and reliability of the well-known and proven gas discharge tube (GDT) protector principle impressively. It eliminates the risk of gas discharge tube "hold on" due to DC line powering or high powered RF signals, which will render the system inoperable and can destroy the discharge tube. HUBER+SUHNER offers a unique concept of self-extinguishing GDT protectors. The unique and patented Semper solution is realised as a simple unit which enables the use of the comprehensive range of HUBER+SUHNER GDT protectors with a replaceable GDT. An easy retrofit of existing GDT protectors is possible or available as complete Semper protectors in a variety of configurations. Whereas many applications generally benefit from the enhanced safety and reliability that the Semper concept offers, applications using DC line power for remote signal amplification and processing and those using high RF power will find self-extinguishing lightning EMP protectors of specific interest.

Quarter-wave shorting stub protectors

HUBER+SUHNER protectors based on quarter-wave technology feature excellent protection performance with very good RF specification. For specific applications protectors with internal DC-block are available.

3400 quarter-wave shorting stub technology protector

3400 quarter-wave shorting stub technology protector

HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form a short for surge signals basically. They have been established as a worldwide industry standard by HUBER+SUHNER as the original manufacturer. The products are maintenance-free and feature the best protection performance with both the highest surge current handling capability and the lowest residual pulse amplitude. Also, their RF performance is superior to other designs, including passive intermodulation. HUBER+SUHNER lightning EMP protectors series 3400 offer a large variety of products and can be adapted to any application. Besides connectorisation and mounting principle, the frequency range has to be selected properly due to their generally limited bandwidth.

3407 quarter-wave stub technology with integrated high-pass filter

3407 quarter-wave stub technology with integrated high-pass filter

HUBER+SUHNER quarter-wave lightning protectors with integrated high-pass filter feature an added useful RF component to the proven premium standard quarter-wave protector design. Thus, they can offer an essentially improved protection performance.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238