Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

English

Additional Information

Microminiature connectors

HUBER+SUHNER connector series SMPM, SMPM-T, SMP, MMCX and MMPX are mainly used for connections to a PCB. The different connector series offer a wide range of products suitable for various applications.

MMCX

MMCX

HUBER+SUHNER MMCX connectors are intended for use in applications where the smallest dimensions have to be achieved. These connectors can be used in applications from DC to 6 GHz. The reliable "snap-on" coupling mechanism ensures that the electrical parameters are consistently reproduced. Due to its non-slotted outer contact, the MMCX series provides a low RF leakage. In addition, HUBER+SUHNER SMT MMCX connectors fully meet today’s SMT (Surface Mount Technology) requirements with superior design, material selection and packaging. HUBER+SUHNER SMT connectors are suitable to all reflow-soldered SMT-PCBs where impedance matching or screened signal transmission is necessary.

SMP

SMP

HUBER+SUHNER SMP connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. SMP connectors have been MIL-SPEC qualified for defense and space flight hardware. The design of the interface and treatment of materials provide true compatibility as well as guaranteed mechanical performance over the mating life of the connector with all MIL-STD-348 SMP connectors in the market.

SMPM

SMPM

HUBER+SUHNER SMPM connectors offer unrivalled miniaturisation and performance for RF applications up to 65 GHz. SMPM connectors are MIL-SPEC qualified for defense and space flight applications. Along with the unique bend-to-the-end Microbend style cable connectors, HUBER+SUHNER offers a large portfolio of different PCB mount SMPM connectors that have been designed with optimised PCB trace launch geometries to offer a complete interconnect design solution from "wire-to-trace".

SMPM-T

SMPM-T

SMPM-T is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL-STD-348 SMPM female interface connector together with a retractable threaded nut provides an integrated solution offering unprecedented electrical and mechanical performance. The SMPM-T handles high density requirements with a connector centreline-to-centreline spacing of just 5 mm (0.20 in) while offering unmatched electrical stability at frequencies up to 67 GHz in even the harshest operating environments.

Minibend series

The minibend series is a truly flexible, 100% tested, preassembled coaxial cable assembly line that is designed for use in low profile internal point-to-point interconnections between RF modules within communications systems. The patented solder-less cable junction allows bending of the cable immediately behind the connector, which eliminates the need for expensive, heavy, and performance-limiting right angle connectors.

Microbend

Microbend

Microbend assemblies provide you with a standard preassembled and tested high performance, cost-effective truly flexible alternative to 0.047 inch custom semi-rigid cable assemblies, eliminating the need for predefined custom lengths and bend configurations. Microbend features include 35 % lower loss than 0.047 inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. Microbend assemblies are available with a wide range of connector interfaces. All Microbend assemblies are available only in a ruggedised version.

Mini141

Mini141

Mini141 is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Mini141 replaces 0.141 inch custom semi-rigid cables with standard flexible cables providing 20% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Mini141 provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Minibend

Minibend

Minibend is a truly flexible coaxial cable assembly which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend replaces 0.086 inch custom semi-rigid cables with standard flexible cables, eliminating the need for predefined custom lengths and bend configurations. Minibend provides you with a preassembled and tested high performance, costeffective alternative in a variety of standard lengths and connector configurations.

Minibend L

Minibend L

Minibend L is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend L replaces 0.086 inch custom semi-rigid cables with standard flexible cables providing 30% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Minibend L provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Microwave cable assemblies

The flexible SUCOFLEX series microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements, in particular electrical stability and low loss, are important. Ideally suited for test and measurement applications and defense systems. Additional lightweight high-end versions are designed to meet the stringent needs of space flights systems (i.e. satellites) and aerospace systems (aircrafts, helicopters, missiles), which are subject to extremely severe operating conditions. SUCOFLEX is only available as assembly.

SUCOFLEX® 100

SUCOFLEX® 100

The SUCOFLEX 100 series flexible microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements – in particular stability and low loss – are important. Their mechanical and climate resistance properties surpass those of standard flexible cables. 

SUCOFLEX® 200

SUCOFLEX® 200

The tape wrapped SUCOFLEX 200 microwave cable assemblies have been specifically developed for high performance and anywhere the best insertion loss, high phase stability versus temperature, excellent return loss and mechanical stability are most important.

SUCOFLEX® 300

SUCOFLEX® 300

The SUCOFLEX 300 lightweight, low loss flexible microwave cable assemblies are high-end products designed to meet the stringent needs of space flight systems (e. g. satellites) and aerospace systems (aircraft, helicopters, missiles), which are subjected to extremely severe operating conditions. The 300 series offers a consistently outstanding mechanical and electrical performance, stability and reliability up to 40 GHz. The added feature of this SUCOFLEX type is a weight reduction of up to 50 % compared to our conventional products.

SUCOFLEX® 500

SUCOFLEX® 500

­When it comes to test and measurement, SUCOFLEX 500 assemblies guarantee the highest level of satisfaction. Not only are they extremely flexible and easy to use, thanks to their unique design, they also deliver best-in-class phase and amplitude stability with flexure, movement, temperature and tensile stress.

Phase shifters

Phase shifter portfolio

Phase shifter portfolio

HUBER+SUHNER phase shifters allow phase change while maintaining constant VSWR and insertion loss values. These passive devices have proven to be successful in aerospace, missile, and satellite programs. The construction of all phase shifters and trimming devices incorporate fine gauge threads for precise tuning. Phase shifters are terminated with precision interfaces per MIL-STD-348 including SMA, TNC, and N (in series and between series). However, custom devices can be manufactured using other interfaces.

Hermetic adapters

HUBER+SUHNER is offering a wide range of adapters in various configurations like within series or between series, straight or angled designs and some with panel mount features. Adapters can also be custom designed in accordance with your application specific requirements.

Hermetically sealed adaptors

Hermetically sealed adaptors

HUBER+SUHNER hermetically sealed adapters are used where ingress or loss of liquid, air or gas for various reasons is a key characteristic.

TVAC cable assemblies

The flexible SUCOFLEX series microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements, in particular electrical stability and low loss, are important. Ideally suited for test and measurement applications and defense systems. Additional lightweight high-end versions are designed to meet the stringent needs of space flights systems (i.e. satellites) and aerospace systems (aircrafts, helicopters, missiles), which are subject to extremely severe operating conditions. SUCOFLEX is only available as assembly.

SUCOFLEX 100 TVAC

SUCOFLEX 100 TVAC

The SUCOFLEX 100 series flexible microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements – in particular stability and low loss – are important. Their mechanical and climate resistance properties surpass those of standard flexible cables. 

SUCOFLEX 200 TVAC

SUCOFLEX 200 TVAC

The tape wrapped SUCOFLEX 200 microwave cable assemblies have been specifically developed for high performance and anywhere the best insertion loss, high phase stability versus temperature, excellent return loss and mechanical stability are most important.