Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
ECOC Rome
ECOC Rome

As in the former years HUBER+SUHNER will be a part also in 2018 at the ECOC where the latest progress in optical communication technologies will be reported in selected papers, keynotes, presentations and special symposia.

 

23/9/2018 - 27/9/2018
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Equipment

Equipment

Any research and development, test, or quality assurance department that works with RF signals is relying on precise and repeatable measurements. Since the quality of a test configuration is only as strong as the weakest link, HUBER+SUHNER offers a wide range of supreme flexible and rugged cable assemblies with excellent amplitude and phase stability and high-precision connectors, as well as terminations and adapters. These state of the art reliability guarantees reduced equipment downtime, which is an economical advantage for testing in laboratories.

Related Products

Microwave Cable Assemblies

HUBER+SUHNER SUCOFLEX flexible microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements, in particular electrical stability and low loss, are important. Ideally suited for test and measurement applications and defense systems. Additional lightweight high-end versions are designed to meet the stringent needs of space flights systems (i.e. satellites) and aerospace systems (aircrafts, helicopters, missiles), which are subject to extremely severe operating conditions. SUCOFLEX is only available as assembly.

SUCOFLEX 100

SUCOFLEX 100

The SUCOFLEX 100 series flexible microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements – in particular stability and low loss – are important. Their mechanical and climate resistance properties surpass those of standard flexible cables. 

SUCOFLEX 500

SUCOFLEX 500

­When it comes to test and measurement, SUCOFLEX 500 assemblies guarantee the highest level of satisfaction. Not only are they extremely flexible and easy to use, thanks to their unique design, they also deliver best-in-class phase and amplitude stability with flexure, movement, temperature and tensile stress.

Test leads

HUBER+SUHNER SUCOFLEX flexible microwave cable assemblies offer superior electrical and mechanical performance for static and dynamic applications. This series is a high-end product designed to provide optimal performance up to 50 GHz, where stringent electrical requirements, in particular electrical stability and low loss, are important. Ideally suited for test and measurement applications and defense systems. Additional lightweight high-end versions are designed to meet the stringent needs of space flights systems (i.e. satellites) and aerospace systems (aircrafts, helicopters, missiles), which are subject to extremely severe operating conditions. SUCOFLEX is only available as assembly.

Sucotest 18

Sucotest 18

HUBER+SUHNER Sucotest 18 cable assemblies feature excellent electrical performance such as low insertion loss combined with unique loss stability and excellent return loss. Sucotest 18 is ideal for daily use in components and assembly shops, test labs and automatic test equipment applications.

Adapters

HUBER+SUHNER is offering a wide range of adapters in various configurations like within series or between series, straight or angled designs and some with panel mount features. Adapters can also be custom designed in accordance with your application specific requirements.

HUBER+SUHNER manufactures a wide range of standard and high-performance adapters
that are ideal for lab and production test applications where measurement accuracy,
repeatability, and optimum electrical performance are critical.

  • Precision interfaces
  • Excellent electrical performance
  • Premium base materials and platings
  • For precision laboratory measurements
  • High repeatability and accuracy

Precision adapters

Precision adapters

HUBER+SUHNER precision adapter assortment focuses on performance for accurate RF measurements.

Board-to-board connectors

HUBER+SUHNER MBX/MFBX/MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX/MFBX/MMBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. These series are the answer to higher integration and miniaturisation. They are the perfect solution for multiple connections from board-to-board and complex stack-ups in radio module applications.

MBX

MBX

HUBER+SUHNER MBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. MBX completes together with the MBX 2nd generation the board-to-board assortment of HUBER+SUHNER with its development based on the well-known board-to-board connector MMBX. MBX fulfils higher requirements with best in class axial misalignment of ±1.2 mm. MBX is the answer to higher integration and miniaturisation. It is the perfect solution for multiple connections from board-to-board / board-to-module and complex stack-ups in radio module applications.

MMBX

MMBX

HUBER+SUHNER MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. Along with MBX the board-to-board portfolio of HUBER+SUHNER provides highest flexibility for today´s and future radio module applications. MMBX connectors offer an operation frequency up to 12.4 GHz. The series contains of a wide range of board and cable connectors with a minimum board-to-board distance of only 6.7 mm.

Bend-to-end assemblies

The Minibend series is a truly flexible, 100% tested, preassembled coaxial cable assembly line that is designed for use in low profile internal point-to-point interconnections between RF modules within communications systems. The patented solder-less cable junction allows bending of the cable immediately behind the connector, which eliminates the need for expensive, heavy, and performance-limiting right angle connectors.

Microbend/Microbend L

Microbend/Microbend L

HUBER+SUHNER Microbend assemblies provide you with a standard preassembled and tested high performance, cost-effective truly flexible alternative to 0.047 inch custom semi-rigid cable assemblies, eliminating the need for predefined custom lengths and bend configurations. Microbend features include 35% lower loss than 0.047 inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. Microbend assemblies are available with a wide range of connector interfaces. All Microbend assemblies are available only in a ruggedised version. Furthermore, the Microbend L features include 30% lower loss as compared to the standard Microbend cable.

Minibend

Minibend

Minibend is a truly flexible coaxial cable assembly which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend replaces 0.086 inch custom semi-rigid cables with standard flexible cables, eliminating the need for predefined custom lengths and bend configurations. Minibend provides you with a preassembled and tested high performance, costeffective alternative in a variety of standard lengths and connector configurations.

Minibend L

Minibend L

Minibend L is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend L replaces 0.086 inch custom semi-rigid cables with standard flexible cables providing 30% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Minibend L provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Mini 141

Mini 141

Mini141 is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Mini141 replaces 0.141 inch custom semi-rigid cables with standard flexible cables providing 20% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Mini141 provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Resistive Components

Terminators

Terminators

Terminators (also called RF loads or dummy loads) are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications.

Phase shifters

Phase shifters

HUBER+SUHNER phase shifters allow phase change while maintaining constant VSWR and insertion loss values. These passive devices have proven to be successful in aerospace, missile, and satellite programs. The construction of all phase shifters and trimming devices incorporate fine gauge threads for precise tuning. Phase shifters are terminated with precision interfaces per MIL-STD-348 including SMA, TNC, and N (in series and between series). However, custom devices can be manufactured using other interfaces.

Contact
Stock assemblies

Link to 
Selection of stock assemblies