Support
CISCOLive!
CISCOLive!

For the first time HUBER+SUHNER will present its fibermanagement solutions at Cisco Live in Barcelona. The Cisco’s annual customer conference is one of the most important events to build the foundation for the digital future.

28/1/2019 - 1/2/2019
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

CDR - cable distribution rack

The CDR (Cable Distribution Rack) is a purpose-built high density fiber management rack which serves as a central cross-connect in the main distribution area of data centers. With a footprint depth of only 300 mm, the CDR is fully modular and scalable up to 1620 ports (3240 fibers) using LC connectivity and 1080 ports (25 920 fibers) using MTP connectivity. Users can benefit from a C-shaped construction where all internal sub-elements are completely installable and accessible from the front side. This important feature means that CDRs can be placed back-to-back on a single floor tile or alternatively against an unused wall for minimal space consumption.

The CDR is 47U high, 300 mm deep and comes in two standard width dimensions of 900 mm and 1200 mm. The 900 mm version is designed for splicing and MTP-LC furcation trays and the 1200 mm version is intended for patching only, whether it be LC or MTP cable systems.

CDR 1200mm wide

CDR 1200mm wide

The CDR 1200 is designed as a dedicated "patching rack" and is configured by adding a 300 mm wide cable over-length rack to the left hand side of a standard 900 mm rack. The CDR 1200 is configured so that an equal amount of cable management is provided on both sides of the rack. The 1200 mm wide rack is better suited for patching applications with standard connectivity (patch cords or fan-outs) or 40G and 100G applications where MTP connectivity is required.

CDR 300mm wide

CDR 300mm wide

The 300 mm wide cabinet is supplied as an empty cabinet and offers additional fiber management to the standard 900 mm CDR when overlength needs to be managed on both sides.

CDR 900mm wide

CDR 900mm wide

The 900 mm wide rack has integrated patch cord management on the right hand side and can facilitate standard fiber trays for pigtail splicing or MTP-LC furcation. Generally the 900 mm wide rack is used for 1G and 10G serial transmission where a standard LC connector interface is required. The 900 mm wide cabinet is supplied as an empty cabinet and then "tray units" can be installed on-site to accept different types of "fiber trays" depending on the required performance or connectivity type.

CDR accessories

CDR accessories

The CDR rack adapts to any environment and can be configured to meet any requirements. Its large pallet of accessories facilitates fiber management and improves cabling.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238