 |
|
Interface compatible with
|
DIN72594-1 (FAKRA)1
|
|
|
SAE / USCAR-18
|
1 FAKRA = Normausschuss Kraftfahrzeuge (DIN)
|
|
Impedance
|
50 Ω
|
|
Frequency range
|
DC .... 6 GHz
|
|
Screening effectiveness
|
≥ 65 dB up to 1 GHz
|
|
Dielectric withstanding volt.2
|
≥ 800 Vrms, 50 Hz (depending on cable)
|
|
Insulation resistance
|
≥ 1 GΩ
|
|
Contact resistance
|
≤ 5 mΩ
|
|
Working current
|
1.0 Adc
|
2 at sea level
|
|
Durability (matings)
|
≥ 25
|
|
Engagement force
|
25 N max.
|
|
Disengagement force
|
2 N min.
|
|
Outer contact pull out force
|
≥ 110 N (depending on cable)
|
|
|
Temperature range
|
- 40 °C .... + 85 °C (peak 105 °C)
|
|
Temperature shock
|
Design verification test plan HUBER+SUHNER
|
|
Corrosion
|
Design verification test plan HUBER+SUHNER
|
|
Vibration
|
Design verification test plan HUBER+SUHNER
|
Design verification test plan HUBER+SUHNER is in accordance with DIN 72594-2 and SAE/USCAR-17
|
|
Bodies
|
brass
|
nickel, gold, silver
|
|
Centre contact
|
brass, spring bronze
|
SUCOPRO, gold
|
|
Crimp ferrule
|
copper
|
nickel
|
|
Insulator
|
PPE, PTFE, PFA, POM or PA
|
|
|
Springs
|
beryllium-copper, hardenend
|
|
|
Plastic housing
|
PPE, POM, PBT or PA
|
|
Some connectors may have a specification that differs from the above mentioned data.
The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request.
Technical data of ARC connectors