Technical data MMPX precision connectors | |||||||||||||||||||
| Electrical Data | Requirements | ||||||||||||||||||
| Impedance |
50 
|
||||||||||||||||||
|
Frequency range (for interface only) |
DC ... 65 GHz | ||||||||||||||||||
|
Dielectric withstanding voltage 1) |
500 V rms, 50 Hz | ||||||||||||||||||
| Working voltage 1) | ≤ 170 V rms, 50 Hz | ||||||||||||||||||
| Insulation resistance |
≥ 1 G
|
||||||||||||||||||
|
Contact resistance - centre contact - outer contact |
≤ 5 m ≤ 2 m
|
||||||||||||||||||
| Return loss, typical | see table below | ||||||||||||||||||
|
RF leackage, typical (for MMPX interface only) |
DC - 25 GHz 85 db |
25 - 50 GHz 65 dB |
50 - 65 GHz 60 dB |
||||||||||||||||
1) at sea level
|
Return loss Connector type |
Frequency range DC - 26.5 GHz |
26.5 - 50 GHz |
50 - 65 GHz |
||||||||||||||||
| straight cable plug (male) 1) | 25 dB | 17.5 dB | 17.5 dB | ||||||||||||||||
| Right anlge cable plug (male) 1) | 25 dB | 20 dB | 20 dB | ||||||||||||||||
|
Straight cable plug (male) precision interface (air dielectric only) 1) |
25 dB |
25 dB |
25 dB |
||||||||||||||||
| Straight PCB jack (female), SMT-version mated with a right angle cable plug | 25 dB | 15 dB | 10 dB 2) | ||||||||||||||||
|
Edge mount PCB jack (female), SMT-version mated with a straight cable plug |
22 dB |
20 dB |
20 dB |
||||||||||||||||
1) mated with straight cable jack (female)
2) valid for recommended PCB structure only
| |||||||||||||||||||
| Mechanical data | Requirements | ||||||||||||||||||
| Engagement force | max. 30 N / 6.7 lbs. (typical 20 N/4.4. lbs.) | ||||||||||||||||||
| Disengagement force 1) | max. 30 N / 6.7 lbs. (typical 15 N/3.3. lbs.) | ||||||||||||||||||
|
Centre contact retention force PCB connectors |
connector ≥ 2 N / 0.4 lbs. assembly ≥ 7 N/ 1.5 lbs. |
||||||||||||||||||
| Durability (matings) | 100 | ||||||||||||||||||
1) decoupling tool MMPX shall be used (74_Z-0-0-555)!
| |||||||||||||||||||
| Processing data PCB connectors | Requirements | ||||||||||||||||||
|
Adherent to the print - shearing 1) - pulling (vertical to PcB) 1) |
straight PCB jack 90 N / 20.2 lbs. 50 N / 11.2 lbs.2) |
edge-mount PCB jack 70 N / 15.7 lbs. no standard value available |
|||||||||||||||||
1) valid for recommended PCB structure only
2) mated with straight cable jack (female)
| |||||||||||||||||||
| Environmental data | Requirements | ||||||||||||||||||
| Temperature range | -55°C ... +155°C / -85°F ... +311°F | ||||||||||||||||||
| thermal shock |
assembly - 55° C ..... + 85° C / -67°F ... +185°F Verbinder - 65° C ..... + 155° C / -85°F ... +311°F |
||||||||||||||||||
| Mechanical shock | 100 g / 6 ms - max. interruption < 1 µs | ||||||||||||||||||
| Corrosion | saltspray test | ||||||||||||||||||
| Vibration | 20 g - max. interruption< 1 µs | ||||||||||||||||||
| |||||||||||||||||||
| Material data | |||||||||||||||||||
| Connector parts | Material | Plating | |||||||||||||||||
| Body | brass | SUCOPRO/gold | |||||||||||||||||
| Centre contacts | copper-beryllium-alloy | gold over nickel | |||||||||||||||||
|
Outer contact - male - female |
brass copper-beryllium-alloy |
SUCOPRO/gold SUCOPRO/gold |
|||||||||||||||||
| Snap ring, male interface | copper-beryllium-alloy | SUCOPRO/gold | |||||||||||||||||
| Insulators | PTFE | ||||||||||||||||||
| |||||||||||||||||||
| Material data for PCB connectors | |||||||||||||||||||
| Connector parts | Material | Plating | |||||||||||||||||
| Centre contacts | copper-beryllium-alloy | SUCOPRO/gold | |||||||||||||||||
| Outer contacts | copper-beryllium-alloy | SUCOPRO/gold | |||||||||||||||||
| Body | brass | SUCOPRO/gold | |||||||||||||||||
| Insulators | PTFE | ||||||||||||||||||
Some connectors may feature specifications that differ from the above mentioned data.
The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request.
