Technical data N 50 Ohm connectors | |||||||||||||||||||
| Electrical data | Requirements | ||||||||||||||||||
| Impedance |
50 
|
||||||||||||||||||
|
Frequency range - flexible cables |
DC ... 11 GHz |
||||||||||||||||||
| - semi-rigid cables | DC ... 18 GHz | ||||||||||||||||||
| |||||||||||||||||||
| Mechanical data | Requirements | ||||||||||||||||||
|
Coupling nut torque - recommended - proof torque |
0.68 Nm ... 1.23 Nm / 6.0 ... 10.0 in. lbs 1.70 Nm / 15.0 in. lbs |
||||||||||||||||||
| - recommended torque * |
Matings: 500 250 100 60 30 Torque: 1 Nm 2 Nm 3 Nm 4 Nm 5 Nm |
||||||||||||||||||
| Durability (matings) |
 500
|
||||||||||||||||||
* for connectors with profile HEX19 (HEX18) coupling nut
| |||||||||||||||||||
| Environmental data | Test conditions | ||||||||||||||||||
| Temperature range | -65°C ... +165°C / - 85° F ... + 329° F | ||||||||||||||||||
| Climatic category |
IEC  55 / 155 / 21
|
||||||||||||||||||
| |||||||||||||||||||
| Material data | |||||||||||||||||||
| Connector part | Material | Plating | |||||||||||||||||
| Bodies | brass | SUCOPLATE® | |||||||||||||||||
| Pin contacts | brass | gold/SUCOPRO | |||||||||||||||||
| Outer contact, slotted | spring bronze | SUCOPLATE® | |||||||||||||||||
| Female contacts |
copper-berylliumalloy; spring bronze |
gold/SUCOPRO | |||||||||||||||||
| Crimp ferrules | copper | SUCOPLATE® | |||||||||||||||||
|
Insulators, standard version |
PTFE or PFA | ||||||||||||||||||
| Gaskets | silicone rubber | ||||||||||||||||||
Some connectors may feature specifications that differ from the above mentioned data.
The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request.
