Back

Company

Solutions

Products

Services

Contacts

English

SYLFA HD modules

SYLFA HD modules are interchangeable connectivity blocks that can be inserted into all SYLFA HD chassis. Patch, transition and pre-terminated modules are available to focus on the needs of central office connectivity.
 

 SYLFA HD pre-terminated modules

SYLFA HD pre-terminated modules

The SYLFA HD pre-terminated module is an assembly pre-connectorised directly with a specific cable length. The pre-terminated system can be supplied as follows:

  • With a module at both ends
  • With a module at one end and a harness assembly at the other end
  • With a module at one end and the other end loose for fusion splicing
Pre-terminated modules reduce the installation time considerably compared to spliced pigtails. Pre-terminated systems can also be used to reduce the optical loss across a link by reducing the number of mated connector pairs.

SYLFA HD blunt-cut modules

SYLFA HD blunt-cut modules

The SYLFA HD blunt-cut module is a special type of pre-terminated module that enables fast and secure splicing in the centralised splicing area. It has a pre-connectorised assembly on the module side with a loose cable for splicing on the other side.
 

SYLFA HD transition modules

SYLFA HD transition modules

The SYLFA HD transition module converts MTP® backbone cables to LC or SC connectivity, enabling fast plug-and-play connections based on MTP trunks. It is generally used for indoor connections between ODF and equipment racks. Transition modules are available for Base-12 or Base-24 MTP backbones.
 

SYLFA HD patch modules

SYLFA HD patch modules

The SYLFA HD patching module is a straight-through LC or SC patching field that allows trunk cables to be connected directly to patch cords or harnesses. In Base-2 single-mode applications, the SYLFA HD patching module provides a fast plug-and-play alternative to fusion splicing. SYLFA HD patch modules can be used in combination with a pre-terminated module to harness configuration.