SENCITY® Rail MULTI 13-Port Antenna

Name: SENCITY® Rail MULTI 13-Port Antenna
SKU: 85010652

Product number 85010652

Identifier 1399.99.0133

Variation: -

Key features

13-Port Railway rooftop antenna for Cellular and Wi-Fi bands
Supports 8x8 Cellular MIMO for 3G, 4G and 5G.Supports 4x4 Wi-Fi MIMO in all Wi-Fi 6E bands.
8 radiators for Cellular bands
4 radiators for Wi-Fi/WiMAX bands
Embedded GNSS antenna with integrated LNA supports GPS L1, Galileo E1, BeiDou B1 and GLONASS G1
Rugged design, meets EN 50155 Railway Standard
Fire retardant according to EN 45545-2 and NFPA-130

How to use it

As the onboard antenna in deployment for Railway communication train-to-ground systems

Electrical data

Bands

Remarks

Electrical data LNA

LNA is connected to	Port 3
Input voltage	3 V ... 5 V
Current cunsumption	20 mA
Noise figure	1.6 dB
Total gain @90° elevation	30 dBic
Remarks	This Antenna is compliant with the Radio Equipment Directive 2014/53/EU EMC: EN50121-3-2 (2016) ETSI EN 303 413 V.1.1.1 (2017-06) ETSI EN 301 489-1 V2.2.3 (2019-03) ETSI EN 301 489-19 V2.1.1 (2019-04) Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage. Antennas with production date prior to 01-Oct-2020 support only GPS and GLONASS bands between 1574 - 1610 MHz

Electrical remarks

Remarks

The antenna provides 8 separate cable leads definited as "Port 1". The antenna provides 4 separate cable leads definited as "Port 2". Ground plane: VSWR and gain values are also valid for installations on non-metallic surfaces (no specific ground plane requirements). Please refer to the outline drawing for cable pigtail length of each port
High-voltage-protection: no voltage on RF port, if the catenary line touches antenna (EN 50124-1, 27.5 kVAC/1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.1sec)

Mechanical data

Material data

Environmental data

Weight	11 kg
Dimensions	84 mm x 368 mm x 862 mm (Heigth x Width x Depth)
Remarks	Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test. Mounting: Shall be installed in longitudinal position to the wind/driving direction. Suitable for installation on high-speed trains with a maximum speed of 500 km/hr.

Radome material	PC (Polycarbonate)
Radome colour	RAL 7043 (dark grey)
Back plate/base plate material	Aluminum
Back plate/base plate colour	Grey

Operation temperature	-40 °C ... 85 °C
Storage temperature	-55 °C ... 85 °C
Transport temperature	-40 °C ... 85 °C
Environment (application)	Outdoor
Ingress protection (IP Rating)	Mated / IP69
Flammability rating	EN 45545-2 R24 HL3
Solar radiation	UL 746C, F1