For further information please refer to data sheet.
LNA is connected to
Port 3
Input voltage
3 V ... 5.5 V
Current cunsumption
45 mA
Noise figure
2 dB
Total gain @90° elevation
38 dBic
Remarks
Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage.
This Antenna is compliant with the Radio Equipment Directive 2014/53/EU EMC: EN50121-3-2 (2016)
Remarks
Indicated VSWR and gain values are valid for a metallic ground plane of 0.5 x 1 m or larger.
Weight
1.3 kg
Dimensions
40 mm x 108 mm x 474 mm (Height x Width x Depth)
Remarks
High-voltage-protection: no voltage on RF port, if the catenary line touches the antenna (EN 50124-1, 3.8 kVDC, 27.5 kVAC, 1min).
High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.125sec).
Corrosion: Low corrosion design acc. to MIL-DTL-14072(E), 96 hours Salt Spray test.
Mounting: Shall be installed in longitudinal position to the wind/driving direction.
Suitable for installation on high-speed trains with a maximum speed of 500 km/hr.
4x composite sealing washers included for silicone-free sealing of the mounting screws.
