SENCITY® Rail MULTI 9-Port Antenna

Product number 85159949

Identifier 1399.99.0165

Variation -

General Information

Key features

Railway rooftop antenna for 2G/3G/4G/5G cellular and Wi-Fi 6E bands
Cellular 4x4 MIMO with four separate broadband integrated antennas and Wi-Fi 4x4 MIMO with four separate antennas
Rugged design, meets EN 50155 Railway Standard
Fire retardant according to EN 45545-2 and NFPA-130
GNSS receiver supports GPS L1, Galileo E1, BeiDou B1, GLONASS G1 constellations

How to use it

As the onboard antenna in deployment for Railway communication train-to-ground systems

Specifications

Electrical data

Bands

Cellular 1-4: 617 MHz ... 694 MHz, VSWR 1.7, Gain 3.5 dBi
Cellular 1-4: 694 MHz ... 960 MHz, VSWR 1.6, Gain 5 dBi
Cellular 1-4: 1350 MHz ... 3300 MHz, VSWR 1.8, Gain 6 dBi
Cellular 1-4: 3300 MHz ... 4900 MHz, VSWR 1.9, Gain 6 dBi
Cellular 1-4: 4900 MHz ... 7125 MHz, VSWR 1.7, Gain 6 dBi
Wi-Fi 1-4: 2400 MHz ... 2500 MHz, VSWR 1.7, Gain 7 dBi
Wi-Fi 1-4: 4900 MHz ... 7125 MHz, VSWR 1.5, Gain 7 dBi
GNSS: 1559 MHz ... 1610 MHz, VSWR 1.8

Remarks

For further information please refer to data sheet.

Electrical data LNA

LNA is connected to	Port 3
Current cunsumption	20 mA
Noise figure	1.6 dB
Remarks	This Antenna is compliant with the Radio Equipment Directive 2014/53/EU EMC: EN50121-3-2 (2016) ETSI EN 303 413 V.1.1.1 (2017-06) ETSI EN 301 489-1 V2.2.3 (2019-03) ETSI EN 301 489-19 V2.1.1 (2019-04) LNA input voltage range: 3...5V Total gain @90° elevation: 30 dBiC Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage.

Mechanical data

Weight	8 kg
Dimensions	84 mm x 380 mm x 439.5 mm (Height x Width x Depth)
Remarks	High-voltage-protection: no voltage on RF port, if the catenary line touches antenna (EN 50124-1, 27.5 kVAC/1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.1sec) Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test. Mounting: Shall be installed in longitudinal position to the wind/driving direction. Suitable for installation on high speed trains with a maximum speed of 500 km/hr.

Material data

Environmental data

SENCITY® Rail MULTI 9-Port Antenna