SENCITY® Rail MULTI Antenna with DAB+ and GNSS

Product number 85178100

Identifier 1399.99.0166

Variation -

General Information

Key features

Railway rooftop antenna for 2G/3G/4G/5G cellular and Wi-Fi 6E bands
Supports DAB+ Band III on one port
Cellular 4x4 MIMO with four separate broadband integrated antennas and Wi-Fi 2x2 MIMO with two separate antennas
Embedded GNSS antenna with integrated LNA supports GPS L1, Galileo E1, BeiDou B1 and GLONASS G1
Rugged design, meets EN 50155 railway standard and Fire retardant according to EN 45545-2 and NFPA130

How to use it

As the onboard antenna in deployment for Rail communication train-to-ground systems with Radio streaming

Electrical data

Bands

Remarks

Electrical data LNA

Electrical remarks

Remarks

Ground plane: VSWR and gain values are valid for installations on a ground plane of 1000x500mm. Please refer to the outline drawing for cable pigtail length of each port. High-voltage-protection: no voltage on RF port, if the catenary line touches the antenna (EN 50124-1, 3.8 kVDC, 27.5 kVAC, 1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element (protection against lightning and short circuit with catenary lines(40kA/0.125s). Isolation Cellular-WiFi: 2400-2500 MHz: -21.0 dB 4900-6500 MHz: -25.0 dB 6500-7125 MHz: -23.0 dB

Mechanical data

Material data

Environmental data

This product is available at:

HUBER+SUHNER

Lead time 12 weeks (ex works)

Distributor

MOUSER with lead time

DIGIKEY with lead time

LNA is connected to	Port 8
Current cunsumption	20 mA
Noise figure	1.6 dB
Remarks	LNA input voltage range: 3...5V Total gain @90° elevation: 30 dBiC Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage.

Weight	9.27 kg
Dimensions	90 mm x 489 mm x 392 mm (Height x Width x Depth)
Remarks	Mounting: Shall be installed in longitudinal position to the wind/driving direction. Suitable for installation on high speed trains with a maximum speed of 500 km/hr. 4x composite sealing washers included for silicone-free sealing of the mounting screws.

Radome material	PC (Polycarbonate)
Radome colour	RAL 7043 (dark grey)
Back plate/base plate material	Aluminium
Back plate/base plate colour	Grey

Operation temperature	-55 °C ... 85 °C
Installation temperature	-55 °C ... 85 °C
Storage temperature	-55 °C ... 85 °C
Transport temperature	-55 °C ... 85 °C
Environment (application)	Outdoor
Ingress protection (IP Rating)	Mated / IP69
Flammability rating	EN 45545-2 R24 HL3
Solar radiation	UL 746C, F1