Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
InnoTrans 2018
InnoTrans 2018

InnoTrans is the leading international trade fair for transport technology and takes places every two years in Berlin.
A unique feature of InnoTrans is its outdoor and track display area, where everything from tank wagons to high-speed trains are displayed on 3 500 metres of track.

18/9/2018 - 21/9/2018
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Jamming

Jamming

Contemporary security and military operations require Electronic Countermeasure (ECM) assets that are capable of providing human capital protection against both symmetric and asymmetric adversaries. The ability to effectively and efficiently control adversary communication systems, by neutralising the threat of Remote Controlled Improved Explosive Devices (RC-IED's), is crucial to the safety of the convoy as well as those in close proximity to the convoy.

HUBER+SUHNER's excellence in connectivity solutions provides a complete offering that meets current and future performance requirements. Our vast experience in cable assemblies, connectors and antenna designs are key to developing solutions that are suitable for the most challenging environments.

  • Broad frequency range: 20 MHz to 10'000 MHz
  • Low profile / shark fin design
  • Low loss and rugged interconnect solution

Related Products

Eacon - field terminated microwave assembly

Some applications require on site flexibility because undefined conditions in the field ask for cable length and connector configuration right on the spot, while other scenarios ask for assembly termination after the cable installation (for example, if the cable feedthrough is smaller than the connector dimension). 

Therefore, HUBER+SUHNER offers solutions to terminate microwave assemblies in the field with a tool box that allows easy, quick and solderless cable assembling, without affecting our high product standards.

Eacon

Eacon

Eacon stands for a simple, flexible and fast way to assemble microwave cables and connectors in the field without compromises to the best performance. The field mountable microwave cables and connectors are light and waterproof, built for frequencies up to 18 GHz – ready for use in the defense market as well as generally in the industrial market.

RF cables RG/Enviroflex

The PTFE/FEP cables of our RG/K series are designed for applications up to 200 °C and are characterised by low losses, especially at high frequencies. The Enviroflex cables do not contain fluorine plastics either in the dielectric nor in the jacket and thus provide a robust and environmentally friendly option.

Enviroflex

Enviroflex

The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.

RG

RG

HUBER+SUHNER high temperature coax cables are designed for applications up to 200 °C, depending on the material selection of the cable. Cable types out of this portfolio provide lowest loss especially at high frequency thanks to PTFE dielectric material.

RF cables Spuma series

The product series Spuma, S and SX provide lowest attenuation, high flexibility and optimal shielding. Products from the Spuma series are similar to the LMR® products from Times Microwave. The series with LSFH jacket material and the radiation crosslinked SX series with the RADOX® jacket offer extremely high flame protection.

Spuma

Spuma

The HUBER+SUHNER Spuma product family stands for lowest loss with halogen free materials. Shielding and VSWR are optimised up to 6 GHz. The cables are more flexible than corrugated ones, allowing easier handling and installation. Tight bending radii are possible. With this set of features, Spuma can support a multitude of application in various industries, including railway, defense, communication, instrumentation and others. Spuma products can also be used as drop-in replacement for LMR® (LMR® is a brand of Times Microwave Inc.).

Antennas

GPS antennas / distribution

GPS antennas / distribution

The GPS L1 / L2 antennas are ideally suited for exterior installations on roofs. These HUBER+SUHNER antennas contain large selective patch antennas and an RF band pass filter that attenuates cellular and radar frequency ranges in order to minimise interferences and blocking effects.

SENCITY Shield

SENCITY Shield

Supporting an ultra broad frequency range from 20 MHz to 10 000 MHz, the SENCITY Shield product line was specifically developed to meet the challenging requirements in military and security applications. The low profile / shark fin design ensures low visibility while still providing exceptional electrical performance in terms of horizontal gain and high power capabilities.

UHF/VHF antennas

UHF/VHF antennas

HUBER+SUHNER offers a broad range of ultra high frequency (UHF) / very high frequency (VHF) antennas suited for communication and ECM applications. This complementary range of antennas is designed for the bandwidth, power, and interoperability demands of contemporary applications.

Wires and cables

Providing cables that reliably transmit ever increasing volumes of data while meeting demaning market requirements is the greatest challenge for cable manufacturers. For this purpose, HUBER+SUHNER has included databus cables in its product range for different markets.

HUBER+SUHNER combines extensive expertise in data communication with electron-beam-cross-linked material technology. The databus cables developed in-house (pre-terminated on request) provide reliable solutions for use in high-temperature applications and harsh environmental conditions. The databuses fulfil the requirements of different markets due to their excellent mechanical and electrical characteristics.

Cat

Cat

MIL 4412 A1

MIL 4412 A1

Single core.

MIL 4412 E1

MIL 4412 E1

Single core - screened.

MIL 4412 E2

MIL 4412 E2

Screened pairs.

MIL 5932 A1

MIL 5932 A1

Single core.

MIL 5932 E1

MIL 5932 E1

Single core – screened.

MIL 5932 E2

MIL 5932 E2

Screened pairs.

RADOX 155 battery cable, flexible (FLR41X or FLR91X)

RADOX 155 battery cable, flexible (FLR41X or FLR91X)

  • Single core
  • Flexible (FLR41X or FLR91X)

RADOX Anticapillary (double insulation)

RADOX Anticapillary (double insulation)

  • Number of conductors 1
  • Cross section 0.35 to 6 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

RADOX Anticapillary (single insulation)

RADOX Anticapillary (single insulation)

  • Number of conductors 1
  • Cross section 0.35 to 10 mm2
  • Voltage rating 60/600 V DC
  • Temperature range −55 to +150 °C (3000 h)
  • Min. bending radius 3 × cable dia.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238