Support
CISCOLive!
CISCOLive!

For the first time HUBER+SUHNER will present its fibermanagement solutions at Cisco Live in Barcelona. The Cisco’s annual customer conference is one of the most important events to build the foundation for the digital future.

28/1/2019 - 1/2/2019
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Small Cells

Small Cells
The growing number of smart mobile devices is challenging the capacity of wireless networks. The most efficient technique to increase capacity is to re-use frequency by installing significantly more cell sites.

Small is beauty
Small Cells, low-powered outdoor access nodes with a typical range of 10 to several hundred metres, provide a cost-effective way of increasing the number of cell sites. This, in turn, improves coverage on city streets and in buildings such as airports, train stations, shopping malls and sports stadiums which are otherwise difficult to reach using traditional macro cells. Because of their smaller power and size and the fact that they can be deployed discretely in buildings and metropolitan street infrastructures (e.g. bus stops, advertising hoardings, etc.), Small Cells and their cabling infrastructure also differ significantly from typical macro cell RRH installations.

HUBER+SUHNER, the global leader in remote radio head connectivity solutions for macro cells has developed a product portfolio that specifically addresses the needs of Small Cell deployments. It comprises an entire family of robust and easy-to-install fiber optic cable systems designed to start, extend and complete daisy chain installations in order to connect remote radio heads with base stations. The portfolio is complemented by radio frequency jumpers, MIMO antennas and flat panel antennas for mm-wave backhauls.

Rugged outdoor as well as indoor solutions complete the offering.

Related Products

Flexible low loss RF cables

The product series Spuma, S and SX provide lowest attenuation, high flexibility and optimal shielding. Products from the Spuma series are similar to the LMR® products from Times Microwave. The series with LSFH jacket material and the radiation crosslinked SX series with the RADOX® jacket offer extremely high flame protection.

The Spuma product series provides lowest attenuation, high flexibility and optimal shielding. Products from the Spuma series are similar to the LMR® products (LMR® is a registered trademark from Times Microwave, Inc.). The FR products with LSFH jacket material offer extremely high flame protection for indoor applications.
 

Spuma

Spuma

The HUBER+SUHNER Spuma product family stands for lowest loss with halogen free materials. Shielding and VSWR are optimised up to 6 GHz. The cables are more flexible than corrugated ones, allowing easier handling and installation. Tight bending radii are possible. With this set of features, Spuma can support a multitude of application in various industries, including railway, defense, communication, instrumentation and others. Spuma products can also be used as drop-in replacement for LMR® (LMR® is a brand of Times Microwave Inc.).

Mobile backhaul antennas

Mobile backhaul antennas are small form factor antennas that minimise the visual impact of mm-wave point-to-point radios.

SENCITY® Matrix

SENCITY® Matrix

Smallest form factor mm-wave antenna minimising the visual impact of point-to-point radios.

Mid size connectors

HUBER+SUHNER connector series 4.3-10, N, UHF and C are mainly used for connections with a cable assembly to a panel. The different connector series offer a wide range of products suitable for various applications (indoor and outdoor).

4.3-10 Connectors

4.3-10 Connectors

HUBER+SUHNER 4.3-10 connectors offer very low PIM performance together with weight and compactness advantages. A key feature of this connector is the separation of the electrical and mechanical plane, which results in a lower coupling torque and the possiblility of offering the connector with screw, hand-screw and quick-lock design, thus simplifying the installation effort and offering for all mechanisms a very high and reliable electrical performance independently from the torque applied.

Low PIM connectors

Quick-Fit Connectors

Quick-Fit Connectors

HUBER+SUHNER Quick-Fit plus is a ground-breaking connector system for Distributed Antenna Systems (DAS and Cell Site applications). It is field mountable and offers an easy assembling with its one piece design. In combination with an all-in-one cable preparing tool for ½” corrugated cables this connector system can be deployed extremely fast. HUBER+SUHNER Quick-Fit plus connectors are available for a variety of corrugated foam as well as plenum rated cables with N, 4.1/9.5 (on request), 4.3-10 and 7/16 interfaces.

Harsh environment cable systems

HUBER+SUHNER is the global leader for remote radio installation solutions. We have a comprehensive offering of FTTA (fiber-to the-antenna), PTTA (power-to-the-antenna) and HTTA (hybrid-to-the-antenna) products, which are tailored to the customer’s needs. We advise operators about which installation methods are available and what their advantages are. We are experts on how to make savings on installation costs and how expensive follow-up costs can be saved. HUBER+SUHNER implements future-proof passive cable network infrastructures, which are compatible with all system vendor products and endure the future generations of active equipment.

MASTERLINE Ultimate Small Cell

MASTERLINE Ultimate Small Cell

MASTERLINE Ultimate Small Cell (MLU SC) is the most innovative cabling system developed by HUBER+SUHNER to date. MLU SC is a factory-sealed, compact, modular, pre-connectorised, rugged, "plug & play" fiber optic installation solution system for installing Small Cells in various scenarios.

It is designed to support stand-alone installations of 1 to 4 radios per node or as a daisy chain solution of 1 to 3 radios per node or demarcation point.

MLU SC also offers the ability to integrate passive WDM modules into its compact footprint allowing to install multiple radios where fiber exhaustion or limited fiber backhaul opportunities exist. Input and daisy chain ports can be connectorised with Q-ODCs (2 to 24 fibers). Thus, the system can be moved easily if network equipment needs to be relocated. Radio output ports are all Q-ODC-2 for easy-to-install OEM specific fiber optic jumpers. Without any doubt – MLU SC is a true vendor agnostic, multi-carrier Small Cell installation solution.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238