Solutions
Solution picture
Radio Frequency components used in the Wi-Fi hotspot on the Fan Mile in Berlin

September saw the start of the pilot phase of a public gigabit Wi-Fi access point on the famous Fan Mile in Berlin, Germany. HUBER+SUHNER is providing Wi-Fi antennas and coaxial cables, thus playing its part in enabling users in the area to surf, chat and stream for free for 30 minutes.

Support
DesignCon
DesignCon

At the the premier conference for chip, board and systems design engineers in the high speed communications and semiconductor communities HUBER+SUHNER will present its newest additions to the well-know connectivity portfolio.

31/1/2018 - 1/2/2018
English

Fiber management in C-RAN HUB

HUBER+SUHNER provides a product portfolio that enables the deployment of future-proof and easy-to-install fiber management for both the data center, FTTH mobile networks markets.
The LISA side access system can accommodate up to 3000 fibers in a single 300 mm deep cabinet or 6000 fibers when placed back to back across a single floor tile. This packing density significantly reduces the total cost per port and limits the amount of space consumption within the building.

Coloured labelling identifies applications clearly and helps to provide error-free identification of ports. This reduces the time required to identify ports and also eliminates the risk of downtime caused by incorrect patching.

A wide range of fiber trays and simple installation from the front side allows users to grow their network as and when they need to. Different applications and connectivity types can be mixed together in the same rack, and customers can choose how and when they want to grow their infrastructure. This flexibility helps to spread project costs and provides users with peace of mind, knowing that as their infrastructure evolves, so will their fiber management system.

The IANOS 4U chassis is designed for high density applications where connections to high density blade servers and switches are required in the same or adjacent racks. Generally mounted above or below switches, the IANOS 4U chassis supports up to 576 fibers (288 ports) per 4U of rack space. The IANOS 1U chassis is designed for medium to high density applications where connections to servers and switches are required in the same or adjacent racks. Generally mounted at the top of equipment cabinets, the IANOS 1U chassis supports up to 144 fibers (72 ports) per 1U of rack space.
 

Recommended Products

LISA - side access fiber management systems

LISA is a dedicated high-density fiber management system commonly used as a centralised cross connect in the main distribution area (MDA) of large data centers. With a 300 mm depth and full access from the front side; LISA cabinets can be positioned against unused walls, at the end of cold aisles or back-to-back on a single floor tile.

LISA racks have a density of 1500 LC ports per rack or 3000 LC ports per tile when placed back-to-back. For MTP applications the density is 1080 or 2160 MTP ports respectively.
The main difference between LISA and conventional 19" panels is the fact that LISA is fully accessible from the front side. This means that users can install, patch or remove fiber trays simply by sliding out the tray. This feature is much more attractive than 19" panels which generally require access to the rear side of the cabinet. Patching to the LISA rack is fast and easy and a dedicated slack storage area for jumpers allows users to make "any-to-any" patching with just two lengths of cord.

LISA - fiber trays

LISA - fiber trays

LISA fiber trays are the side-facing connectivity blocks that are inserted into tray units within high density CDR and NGR racks. Designed for speed of installation and improved accessibility, the LISA fiber trays can be installed and removed in under 10 seconds. fiber trays are available to cover a wide range of applications including pigtail splicing and MTP-LC transitions.

 

IANOS® high-density inter-connects

The IANOS system from HUBER+SUHNER is a state of the art fiber optic management system which facilitates fast, flexible and future-proofed connectivity in the data center. As its name suggests "IANOS" (as in Roman mythology) looks to the past as well as to the future. This means that "IANOS" is a combination of previous experience and valuable insight into the future.

Data centers are constantly adapting to reflect the demands placed on them, and todays fiber management systems need to accommodate these changes with the minimum amount of cost, time and disruption. As data centers evolve, we see a broad mixture of applications and data rates depending on the location, the business model and of course the data demand. IANOS accommodates these changes by offering the widest range of connectivity scenarios in a single generic platform.

IANOS® modules

IANOS® modules

IANOS modules are interchangeable connectivity blocks that can be inserted into the IANOS chassis from the rear or front side. A wide range of different modules are available to cover many different applications such as patching, splicing, transition and conversion. Single and twin modules are available to give users a higher degree of flexibility and choice as to how they want to build their fiber optic infrastructure.

IANOS modules are extremely compact and lightweight and they can easily be inserted and removed as the infrastructure evolves. Operators who upgrade their infrastructure to higher data rates can remove their legacy 10G modules and then replace them with modules more suitable for 40G and 100G for example. This building block approach is what makes the IANOS system so scalable and adaptive.

Contact
HUBER+SUHNER Inc.
Mr. Bill Burress
Regional Sales Director, FO Division
  +1 866 482 3778
  +1 704 587 1238
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238