Support
CISCOLive!
CISCOLive!

For the first time HUBER+SUHNER will present its fibermanagement solutions at Cisco Live in Barcelona. The Cisco’s annual customer conference is one of the most important events to build the foundation for the digital future.

28/1/2019 - 1/2/2019
English
We use cookies to improve the website and our services. You accept the use of cookies if you navigate further on this page or close this banner. To find out more, see our data protection statement.

Automatic Test Equipment

Automatic Test Equipment
Driven by innovative industries such as semiconductor and automotive, analogue and digital automatic testing is evolving fast. HUBER+SUHNER meets the technological challenges by offering RF solutions with affordable performance in order to maximise testing efficiency. Known for its high-quality standards, HUBER+SUHNER provides a comprehensive range of RF interconnect solutions which guarantee reliability, repeatability and durability while enhancing the ease of integration, density and flexibility.

Related Products

Bend-to-end cable assemblies

The Minibend series is a truly flexible, 100% tested, preassembled coaxial cable assembly line that is designed for use in low profile internal point-to-point interconnections between RF modules within communications systems. The patented solder-less cable junction allows bending of the cable immediately behind the connector, which eliminates the need for expensive, heavy, and performance-limiting right angle connectors.

Microbend/Microbend L

Microbend/Microbend L

HUBER+SUHNER Microbend assemblies provide you with a standard preassembled and tested high performance, cost-effective truly flexible alternative to 0.047 inch custom semi-rigid cable assemblies, eliminating the need for predefined custom lengths and bend configurations. Microbend features include 35% lower loss than 0.047 inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. Microbend assemblies are available with a wide range of connector interfaces. All Microbend assemblies are available only in a ruggedised version. Furthermore, the Microbend L features include 30% lower loss as compared to the standard Microbend cable.

Minibend

Minibend

Minibend is a truly flexible coaxial cable assembly which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend replaces 0.086 inch custom semi-rigid cables with standard flexible cables, eliminating the need for predefined custom lengths and bend configurations. Minibend provides you with a preassembled and tested high performance, costeffective alternative in a variety of standard lengths and connector configurations.

Minibend L

Minibend L

Minibend L is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Minibend L replaces 0.086 inch custom semi-rigid cables with standard flexible cables providing 30% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Minibend L provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

Mini 141

Mini 141

Mini141 is an enhanced, low loss version of the Minibend flexible coaxial cable assembly with increased phase stability and power handling capacity which is designed for use in low profile, internal, point-to-point interconnections between RF modules within communications systems. Mini141 replaces 0.141 inch custom semi-rigid cables with standard flexible cables providing 20% lower attenuation and eliminating the need for predefined custom lengths and bend configurations. Mini141 provides you with a preassembled and tested high performance, cost-effective alternative in a variety of standard lengths.

High flexible cables

HUBER+SUHNER develops and produces coaxial cables for a wide range of applications all over the world in accordance with international standards. Many years of experience and in-house manufacturing combine to produce a portfolio of components adapted perfectly to one another. Continuous further development ensures that the products are perfectly aligned with market requirements and incorporate the latest technology. An innovative development department with in-house test laboratories can react quickly to changing market trends and even develop customer-specific solutions.

Multiflex 141

Multiflex 141

Multiflex microwave cables are the flexible alternative to semi-rigid cables. They are used in commercial and military RF and microwave airborne systems, communication systems, cellular base stations, satellite, ground systems – in brief: anywhere a flexible semi-rigid cable is required.

Multiflex 86

Multiflex 86

Multiflex microwave cables are the flexible alternative to semi-rigid cables. They are used in commercial and military RF and microwave airborne systems, communication systems, cellular base stations, satellite, ground systems – in brief: anywhere a flexible semi-rigid cable is required.

Multicoax connectors

The HUBER+SUHNER MXPM and MXP connector lines are the perfect fit in a world where performance, speed and density matter.

Both lines are excellent solutions for bench-top testing, system testing as well as for internal cabling in automated test equipment.

The entire MXPM and MXP assembly assortment comes with the highly flexible and ultra-stable Multiflex cable as a standard.
 

MXPM70

MXPM70

MXPM is a pioneering multicoax solution that supports up to 70 GHz (with option to 85 GHz). By offering a high density pitch (2.54 mm, 0.1 inch), the MXPM guarantees a satisfying experience with its user-friendly magnet mount connection, making performance and reliability affordable.

MXP50

MXP50

Multicoax solution up to 50 GHz. 

MXP40

MXP40

Multicoax solution up to 40 GHz.

MXP18

MXP18

Multicoax solution up to 18 GHz.

Precision connectors

HUBER+SUHNER connector series SMA, PC 1.85, PC 3.5 and SK are used in a wide range of applications where high performance is required. 

PC 1.85

PC 1.85

HUBER+SUHNER PC 1.85 connectors are precision connectors for use in microwave applications up to 65 GHz. The connectors features best electrical performance, excellent mechanical stability as well as extreme reliability. They are particularly well suited for semi-rigid, semi-flexible and flexible microwave cables. PC 1.85 is intermateable with PC 2.4.

SK (2.92 mm standard)

SK (2.92 mm standard)

HUBER+SUHNER SK connectors are precision connectors for microwave applications up to 40 GHz. They are intermateable with series SMA and PC 3.5. They have a high mechanical stability and an excellent repeatability. The shortened male pin ensures a non-destructive mating process. The glass beads, when used in conjunction with the SK launchers, enable the connectors to be replaced without disturbing the hermetic seal. For a mechanical decoupling between glass bead and internal microwave circuit, stress relief contacts are available.

PC 3.5

PC 3.5

HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable for use with semi-rigid cables and microwave components. They are intermateable with SMA and SK (2.92 mm) connectors. Due to an air dielectric interface and the more durable construction a superior repeatability further enhances the performance.

SMA

SMA

HUBER+SUHNER SMA connectors are precision connectors for microwave applications up to 18 GHz. The extended frequency version operates with excellent return loss performances up to 26.5 GHz. There is a huge variety of applications for SMA connectors, as in telecom, test and measurement, instruments, avionics, etc. SMA is classified into the two categories HUBER+SUHNER standard SMA connectors for high-end applications or applications subject to rough conditions and HUBER+SUHNER ECO SMA connectors for high volume.

Microminiature connectors

HUBER+SUHNER connector series SMPM, SMPM-T, SMP, MMCX and MMPX are mainly used for connections to a PCB. The different connector series offer a wide range of products suitable for various applications.

MMPX

MMPX

The snap-on connector family MMPX is the most ideal coaxial-to-PCB system solution for operating frequencies up to 65 GHz (80 GHz) and data rates up to 80 Gbps. The comprehensive product range consists of cable connectors and assemblies, PCB connectors and adapters to open standards. MMPX connectors feature excellent electrical performance at smallest mechanical dimensions. The broadband characteristics, the small size and the outstanding performance permit new solutions for applications in numerous markets such as high speed digital testing and radio frequency testing (60 GHz WPAN), industrial, mobile communication, space and defense.

MMPX (80 GHZ solution with PC1.0, Microbend 1R and Boaflex 110 Ghz)

MMCX

MMCX

HUBER+SUHNER MMCX connectors are intended for use in applications where the smallest dimensions have to be achieved. These connectors can be used in applications from DC to 6 GHz. The reliable "snap-on" coupling mechanism ensures that the electrical parameters are consistently reproduced. Due to its non-slotted outer contact, the MMCX series provides a low RF leakage. In addition, HUBER+SUHNER SMT MMCX connectors fully meet today’s SMT (Surface Mount Technology) requirements with superior design, material selection and packaging. HUBER+SUHNER SMT connectors are suitable to all reflow-soldered SMT-PCBs where impedance matching or screened signal transmission is necessary.

SMP

SMP

HUBER+SUHNER SMP connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. SMP connectors have been MIL-SPEC qualified for defense and space flight hardware. The design of the interface and treatment of materials provide true compatibility as well as guaranteed mechanical performance over the mating life of the connector with all MIL-STD-348 SMP connectors in the market.

SMPM

SMPM

HUBER+SUHNER SMPM connectors offer unrivalled miniaturisation and performance for RF applications up to 65 GHz. SMPM connectors are MIL-SPEC qualified for defense and space flight applications. Along with the unique bend-to-the-end Microbend style cable connectors, HUBER+SUHNER offers a large portfolio of different PCB mount SMPM connectors that have been designed with optimised PCB trace launch geometries to offer a complete interconnect design solution from "wire-to-trace".

SMPM-T

SMPM-T

SMPM-T is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL-STD-348 SMPM female interface connector together with a retractable threaded nut provides an integrated solution offering unprecedented electrical and mechanical performance. The SMPM-T handles high density requirements with a connector centreline-to-centreline spacing of just 5 mm (0.20 in) while offering unmatched electrical stability at frequencies up to 67 GHz in even the harshest operating environments.

Board-to-board connectors

HUBER+SUHNER MBX/MFBX/MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX/MFBX/MMBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. These series are the answer to higher integration and miniaturisation. They are the perfect solution for multiple connections from board-to-board and complex stack-ups in radio module applications.

MBX

MBX

HUBER+SUHNER MBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. MBX completes together with the MBX 2nd generation the board-to-board assortment of HUBER+SUHNER with its development based on the well-known board-to-board connector MMBX. MBX fulfils higher requirements with best in class axial misalignment of ±1.2 mm. MBX is the answer to higher integration and miniaturisation. It is the perfect solution for multiple connections from board-to-board / board-to-module and complex stack-ups in radio module applications.

MFBX

MFBX

HUBER+SUHNER MFBX and eMFBX connectors are especially developed for high-volume PCB-to-PCB applications. MFBX / eMFBX connectors are tailor-made solutions for medium axial and radial misalignments requirements at frequencies up to 6 GHz. MFBX connectors are based on machining technologies whereas eMFBX is based on stamp and bending.

MMBX

MMBX

HUBER+SUHNER MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. Along with MBX the board-to-board portfolio of HUBER+SUHNER provides highest flexibility for today´s and future radio module applications. MMBX connectors offer an operation frequency up to 12.4 GHz. The series contains of a wide range of board and cable connectors with a minimum board-to-board distance of only 6.7 mm.

Contact
HUBER+SUHNER Inc.
Customer Service
Customer Service
  +1 866 482 3778
  +1 704 587 1238