IANOS® 高密度内部连接

IANOS® Lite chassis 1 U

The IANOS Lite chassis 1 U comes in a standard and skeleton design and is suitable for medium-density applications where connections to servers and switches are required in the same or adjacent racks. With its fixed trays and optional cable management, the chassis supports up to 96 fibers (48 ports) per 1 U of rack space.

IANOS® standard chassis 1 U

The IANOS standard chassis 1 U is designed for medium to high-density applications where connections to servers and switches are required in the same or adjacent racks. With its movable trays and optional cable management, the chassis supports up to 144 fibers (72 ports) per 1 U of rack space.
 

IANOS® standard chassis 4 U

The IANOS standard chassis 4 U is designed for high-density applications where connections to high-density blade servers and switches are required in the same or adjacent racks. Generally mounted above or below switches, the chassis supports up to 288 ports (576 fibers with LC duplex adapters) per 4 U of rack space.
 

IANOS® 标准机架 4 U

IANOS 标准机架 4 U 专为需要在相同或相邻机架中连接高密度刀片服务器和交换机的高密度应用而设计。 机架通常安装在交换机的上方或下方，每 4 U 机架空间最多支持 288 个端口（LC 双工适配器的光纤）。

 

IANOS® 标准机架 1 U

IANOS 标准机架 1 U 专为需要在相同或相邻机架中连接服务器和交换机的中高密度应用而设计。 凭借其可移动托盘和可选电缆管理，机架支持 多达 144 根光纤（72 个端口）/ 1 U 机架空间。
 

IANOS® 标准机架 1 U

IANOS 标准机架 1 U 专为需要在相同或相邻机架中连接服务器和交换机的中高密度应用而设计。 凭借其可移动托盘和可选电缆管理，机架支持 多达 144 根光纤（72 个端口）/ 1 U 机架空间。

 

IANOS conversion modules

The IANOS conversion module provides an easy upgrade path for users who want to convert their pre-installed MTP® backbone cables to match new transceiver requirements. This process allows users to get full fiber utilisation from their existing backbones without adding any new fibers. For example, two Base-12 backbone trunks can be converted to three Base 8 MTP connectors (40G SR4) or a single Base-24 MTP connector (100G SR10).

IANOS patch modules

The IANOS patching module is a straight-through MTP®, LC or SC simplex patching field that allows trunk cables to be connected directly to patch cords or harnesses. In Base-2 single-mode applications, the IANOS patching module provides a fast plug-and-play alternative to fusion splicing, and for MTP® multimode applications the patching module is designed to facilitate end-to-end parallel optics using Base-8, Base-12 or Base-24 connectivity.

IANOS pre-terminated modules

The IANOS pre-terminated module is a "single" module which is pre-connectorised directly with a specific cable length. The pre-terminated system can be supplied as follows:

• With a module at both ends
• With a module at one end and a harness assembly at the other end
• With a module at one end and the other end loose for fusion splicing

IANOS splice modules

The IANOS splicing module is available as a single or double module. The single module is ideal to accomodate 12 fiber strand cables. It offers excellent handling due to its unique two-layer design. The double module facilitates 24 splices. Both modules support heat-shrink splices or sandwich splices and are suitable for all Optipack 8 and 12-strand cables, while the double module supports also 24-strand cables. The design assures minimum fiber bending radius at any time.

IANOS splitter modules

IANOS TAP modules

IANOS TAP modules are passive optical devices which can create a 100 % copy of the incoming signal with lower power level. The copy of the original signal can be used for monitoring purposes or for data retention.

TAP modules can be combined with other connectivity options to save valuable rack space and make room for more revenue-generating active equipment. Network performance and reliability requirements can be achieved by configuring five different splitting ratios. The modules  are available as single-mode or multimode and can be combined with LC, SC and/or MTP® interfaces.

 

IANOS transition modules

The IANOS transition module converts MTP® backbone cables to LC or SC simplex connectivity at the front of the module so that patch cords can be connected to nearby active equipment. Generally used for lower data rates such as 1 G, 10 G or 16 G, the transition module enables users to upgrade their LC-based links in the future by simply replacing the transition module with an MTP®-based conversion or patching module. Transition modules are available in single or double versions and are suitable for Base-8, Base-12 or Base-24 MTP® backbones.

IANOS® 防尘模块盖

IANOS 机架经常被安装在 19” 设备配电架的顶部。 这些机架通常位于需要分离冷热通道以最大限度地提高效率的冷/热空气容器内。 IANOS提供的“按需扩展”方法可以实现投资的优化。 可以使用 IANOS 防尘模块盖来封闭未使用 的模块空间，以提高安装效率。
.
 

IANOS® 光缆管理器

IANOS 是一种高密度系统，旨在管理大量连接。 为确保正确的光缆管理，前后光缆管理等解决方案可确保为不同的机架和模块类型正确、可靠地处理每根光缆。