Assemblies / Cable systems

E-2000™ (LSH) assemblies

E-2000 is a high performance connector which meets the highest standards by excellence in design and manufacturing processes. Only high quality and high precision materials are used to guarantee connections at the highest level. HUBER+SUHNER E-2000 products meet the international standards IEC 61754-15 and TIA 604-16 and are naturally RoHS compliant.

FC assemblies

The FC is a big-form connector. The housing is threaded to the adapter and therefore assures a stable and rigid connection suitable for test+measurement, industry and medical application.

SN assemblies

SN connectors offer new-era dual fiber connectivity with high-performance technology that are easy to use with a easy plug-and-play functionality 

In combination with a new high density cable, a higher packing density can also be achieved with easy-to-clean ferrule technology.
 

MDC assemblies

MDC connectors offer new-era dual fiber connectivity with a easy plug-and-play functionality and polarity change

In combination with a new high density cable, a higher packing density can also be achieved with easy-to-clean ferrule technology.
 

SC assemblies

The SC connector is one of the most common solutions for reliable networks. With the big form ferrule, this connector ensures a reliable optical connection with good mechanical stability. Its push-pull design prevents rotational misalignment.

LC assemblies

The LC connector is established because of its small size and its very reliable connecting quality. In the last five years it has become the most popular connector in the world. This success can be attributed to a series of innovations and the company's consistent approach to supply chain optimisation. The innovative LC-XD connector in particular sets new standards for packing density and handling in data centers.

Hybrid assemblies

MTP-MTP jumpers

Jumper cables are used to make the final connection from patch panels to transceivers, or they are used in the centralised cross connect as a means of connecting two independent backbone links. Jumper cables are available with LC connectors or MTP connectors depending on whether the infrastructure is serial or parallel. Generally, jumper cables are short length assemblies because they only connect two devices within the same rack, however in some cases jumper cables can be longer, such as "middle of row" or "end of row" distribution architectures.

HUBER+SUHNER manufactures jumper cables which are optimised for the "in-rack" environment. Jumper cables are smaller and more flexible than conventional assemblies and connectivity is designed to allow highest packing density and easy, fast access. All of our jumper cables contain bend optimised fiber for enhanced performance under tight bending conditions, and our connectors are colour coded and identified based on base type and fiber type.

Optipack trunk system (MTP-MTP)

Optipack trunk cables are high density multi-stranded cables which form the backbone of the data center. Available in different fiber-counts up to 144 fibers, the Optipack trunks reduce the installation time by consolidating multiple sub-units into a single cable. This approach significantly reduces the overall diameter of the cable and provides much better space utilization of cable routing channels.

Optipack trunk cables are available with 8, 12 and 24 fiber sub-units so that users can deploy Base-8, Base-12 or Base-24 infrastructures to suit their MTP connectivity requirements.

Optipack harness system (LC-LC)

Optipack harness systems (LC-LC) are used as pre-connectorised backbone links between cabinets in the data center. Generally, trunk harnesses will be connected to the rear side of patching modules and LC jumpers will be used as equipment cords to servers and switches. Backbones are generally deployed with singlemode fiber because only this fiber offers a future-proofed infrastructure for higher data rates. Multimode LC trunk harnesses are not recommended because LC multimode connectors do not offer an upgrade to 40G or 100G over parallel optics.

Optipack conversion harness system (MTP-MTP)

Optipack conversion harnesses allow users to convert their existing MTP backbone cables to an MTP type which matches their active equipment. Conversion harnesses are a low-loss alternative to conversion modules because they eliminate one mated MTP pair across the link. Many of today’s legacy infrastructures are built using a Base-12 MTP backbone design, however experience shows us that this connector is rarely used on higher data rate switches or servers. Currently Base-8 is the preferred connector for 40G (SR4) transceivers and Base-24 is the preferred connector for 100G transceivers (SR10).
The wide variation of MTP connector types in the modern data center has led to some confusion concerning the identification of different Base-types. HUBER+SUHNER conversion harnesses are supplied with colour coded boots so that users can quickly identify the required connectivity type. This is particularly important with conversion harnesses that have different connectors at each end of the assembly.
 

Optipack transition harness system

Optipack transition harnesses provide a transition from MTP connectivity in the backbone to LC duplex connectivity on switches and servers. Instead of using LC patch panels and cords, the harness provides a fast and compact alternative that plugs directly into equipment transceivers. Many of the data centers today are designed with multimode MTP backbones because this is the most flexible and future-proofed
way of adapting from one type of connector to another.
 

Q-ODC radio jumpers

Q-ODC-2 link assemblies

Q-ODC-12 link assemblies

Q-ODC-12 multi-branch jumper

Discrete fiber optic feeders

The solution with discrete fiber and power cables supports every type of cell site installation, whether the remote radios are co-located (mast-top installation) or distributed on rooftops of buildings. HUBER+SUHNER has a leading role in the design and manufacturing of harsh environment connectors (e.g. ODC, FullAXS, Q-ODC or Q-XCO) and cable assemblies for remote radio systems. The installation method with discrete cables is the default solution of mobile system vendors. HUBER+SUHNER is an approved and qualified cable assembly supplier for the majority of the tier 1 and tier 2 system vendors.

Discrete power feeders for single RRH

Discrete power feeders are 2-core power cables for RRH power supply that support almost every type of cell site installation. The installation method with discrete cables is the default solution of mobile system vendors.

The discrete power feeders for single RRH are available in the European market with LSFH sheath material as CPR Dca or B2ca-complaint and in the US market with PVC sheath material, UL-listed as per region-specific needs.

In addition to the conventional shielding with copper braiding, shielding with aluminium foil and earth conductor is also available now that enables a faster installation as the unbraiding of the shield is no longer necessary.
 

MASTERLINE Ultimate (MLU)

Multi-riser cable with compact connector head

MASTERLINE Ultimate is HUBER+SUHNER’s most innovative fiber optic cabling system for remote radio installations. The pre-connectorised factory-sealed fiber optic systems support up to 12 RRHs and connect the remote radios with easy-to-install Q-ODC fiber optic jumpers.

The robust connector head with an integrated pulling eye allows easy cable lifting without the need for hoisting grips. The encapsulated connector head can be directly attached to the mast with a single "click" at a pre-mounted adaptor plate. These unique features make MASTERLINE Ultimate the best-in-class product in terms of ease of mast-top installation, installation robustness and efficiency.

MASTERLINE Ultimate Power (MLUP)

Multi-wire power cable with compact connector head

MASTERLINE Ultimate Power enables a power supply installation with only one power cable, instead of 6 individual power cables. The compact pre-connectorised head supplies −48 Vdc for up to 6 RRHs.
Power jumpers, available in different lengths, connect the RRHs with −48 Vdc. The robust factory-sealed connector head with an integrated pulling eye allows easy cable lifting. The encapsulated connector head can be directly attached to the mast with a single "click" at a pre-mounted adaptor plate.

MASTERLINE Extreme (MLE)

Multi-riser cable with compact divider

MASTERLINE Extreme with Q-ODC-2 connectors is an efficient solution in terms of ease of installation, cost and required space on the mast. The compact divider minimises the wind-load and can be fed through small holes (80 mm diameter). The ruggedised push-pull connector Q-ODC allows the installer to connect the RRH jumper cables with a single "click", making it a genuine "plug & play" cabling system. MLE with Q-ODC is available to support up to 12 remote radios.
MASTERLINE Extreme with one Q-ODC-12 connector allows the installer to connect 6 RRH jumper cables with a single "click" and can even be installed through holes with a diameter of 20 mm. The Q-ODC-12 connector has the highest fiber density, based on the proven QN push-pull mating system and can connect 12 fibers in one mating step.
MASTERLINE Extreme is the preferred choice of network installers who require trouble free, reliable and efficient field deployments. HUBER+SUHNER`s MASTERLINE Extreme product family is unique in the market and provides the best value for money.

MASTERLINE Extreme Power (MLEP)

Multi-wire power cable with compact divider

MASTERLINE Extreme Power enables −48 Vdc power supply installation with only one power cable, instead of 6 individual power cables. The compact and robust factory sealed divider splits the DC power cable into 6 ruggedised break-out cables, which are linked to the RRHs – either directly or via extension jumpers in different lengths. With a hoisting grip, attached below the divider, the cable system is lifted up to the mast.

MASTERLINE Classic (MLC)

Multi-riser cable with distribution box

MASTERLINE Classic uses separate multi-fiber and multi-conductor copper riser cables that are connected to mast mounted FTTA/PTTA distribution boxes which are then linked to the RRHs with short jumper cables. Traditionally multi-riser cables with distribution boxes have been the preferred solution for multi-RRH installations, however with the increasing number of remote radios per site mast space limitations and wind loading have become critical issues to operators.
Moreover some operators can incur extra leasing costs for every box placed on the mast, thus distribution box based systems are gradually being superseded by box-less solutions like MASTERLINE Extreme (see  page 42). In general, the installation method with boxes is cost effective and offers installation flexibility but it does require handling and connecting of indoor LC connectors at the mast-top distribution box. Many operators want to avoid the risk of opening and maintaining mast-top boxes by non-trained or non-authorised persons.

MASTERLINE Flex Box (MLFB)

MASTERLINE Flex Box (MLFB) is a verstile distribution box simplifying outdoor deployment. It's designed for maximum planning flexibility to be used in many street furnitures. It's simple to install with a guided inside layout and the IP protection around the fiber optic jumpers. And it has integrated cable overlength management for maximum comfort when doing maintenance or site upgrades: it's meant to stay in the network until 7G

Contact your sales manager for availability.
 

MASTERLINE Mobile

HUBER+SUHNER has a proven track-record in temporarily set-up fiber optical communication networks, e.g. for the broadcast industry, in disaster recovery and industrial applications. The need for mobility of temporarily set-up communication networks poses high challenges to the products in terms of high tensile loading, severe crush occurrences and repeated coiling capability. The MASTERLINE Mobile deals perfectly with these challenges thanks to HUBER+SUHNERs highly flexible and yet robust field-cables. The specially designed field-cables provide excellent broadcast signal quality in demanding environments where other fiber optical cables are likely to fail.

MASTERLINE Ultimate with Q-ODC-12/24 (MLUQ)

MASTERLINE Ultimate with Q-ODC-12/24 (MLUQ) is HUBER+SUHNER’s most innovativ fiber optic cabling system in regards of modularity. It consists of 3 parts – the connector head, the connectorised multi-fiber cable and the RRH jumper. This allows a highly modular RRH installation.
The connector head is equiped with 6 or 12 Q-ODC-2 sockets to connect the RRHs with fiber optic jumpers and a Q-ODC-12 or Q-ODC-24 socket (reverse plug) to connect the multi-fiber cable. The multi-fiber cable is terminated with a Q-ODC-12 or Q-ODC-24 extension connector. The connector is  protected with a waterproof cap which has an integrated pulling eye for easy cable lifting.
These features allow a separated installation of the remote radio frame and the fiber optic cable. Additionally, due to the small outer diameter of the Q-ODC-12/24 extension connector, the multi-fiber cable can be fed through a hole with a diameter of only 22 mm.

Multicore power supply cable

H3RO

H3RO (harsh environment reticulated optics) is a pre-terminated modular plug and play fiber optic system, simplifying fiber optics with robust low loss components for industrial applications.
 

MASTERLINE Ultimate Micro (MLUM)

MASTERLINE Ultimate Micro (MLUM) is a compact distribution box which has been specially developed for use in very space limited locations while still ensuring high number of connections in communication and industrial applications.

 

Accessories for remote radio installation solution

HUBER+SUHNER is an experienced partner for remote radio installation and we are close to the installers working in the field. We understand the daily installation issues and the need for field-proven tools and accessories.
Excess cable boxes help to safely store fiber optic cable at the bottom of the mast or in 19" racks. The 19" CTB patching box with a pullout tray for easy access is compatible with the MASTERLINE cable system.
We also offer a basic cable clamp portfolio, which covers most of the RRH installation solutions and cable combinations. The clamps used are field-proven, easy to install and allow for an upgrade or exchange of cables.
We offer a universal grounding kit specially designed to accommodate the range of HUBER+SUHNER power and hybrid cable sizes. Also available is a heavy-duty cable stripping tool.