NGR accessories

Cross-connect unit 6 U

The cross-connect unit 6 U ensures well-organised cable management when patching between cassettes within the rack. The dividing plates of the unit provide a clear separation between patch cords and incoming cables.
 

Cross-connect unit 4 U

The cross-connect unit 4 U ensures proper cable management when patching between cassettes within the rack. The dividing plates of the unit provide a clear separation between patch cords and incoming cables.
 

NGR 300 cable routing channel

The 5 or 6 U high cable routing channel ensures proper cable management between racks at the top, bottom or to the rear of the rack.
 

NGR 600 cable routing channel

The 5 or 6 U high cable routing channel ensures proper cable management between racks at the top, bottom or to the rear of the rack.
 

NGR 900 cable routing channel

The 5 or 6 U high cable routing channel ensures proper cable management between racks at the top, bottom or to the rear of the rack.
 

NGR 1200 cable routing channel

The 6 U high cable routing channel ensures proper cable management between racks at the top, bottom or to the rear of the rack.
 

NGR 1500 cable routing channel LISA Double Access

The specially designed 2 U high cable routing channel for LISA Double Access ensures proper cable management between racks at the top, bottom or to the rear of the rack.
 

NGR 300 cable routing channel left/right for NGR 1500

The specially designed 2 U high cable routing channel for LISA Double Access in 300 mm extension racks on the left and right ensures proper cable management between racks at the top or bottom of the rack.
 

19” break-out plate standard

The 19-inch break-out plate with cable fixation for 5 mm conduits is suitable for all cable sizes and fiber counts for top or bottom rack entry.
 

19” break-out plate large

The large 19-inch cable break-out plate forms the base plate (1st level) and can be extended with an additional cable break-out plate (2nd level) without the use of tools. The plates are used to secure many loose tube/multi-break-out cables at the top or bottom of the rack and for the subsequent separation of 5 mm loose tube conduits.
 

300 mm break-out plate

The compact 300 mm cable break-out plate with conduit brackets for fixing multi-break-out cables and loose tube conduits is laterally mounted at the bottom or top of the rack frame. Different variants and multiple lateral arrangements are available as required.
 

Protective cover for 19” break-out plate

The protective cover for the 19-inch break-out plate protects the transition point of fibers.

Trough for 19“ break-out plate

The trough provides separation between the cable entry and sub-racks and is used for easier guiding of large loose tube conduits or individual break-out cables to the side of the rack at the bottom or top of the rack.
 

Cable guiding

Vertical cable guiding in the rack with 3 different retainer designs.
 

Cable fixation

Fastening of loose tubes or conduits in the rack.
 

Rack fastening kit for walls

The rack fastening kit fixes racks on a wall.
 

Rack fastening kit for ceilings

The rack fastening kit fixes racks on a ceiling.
 

Rack fastening kit for raised floors

The rack fastening kit fixes racks on raised data center floors.
 

Rack fastening kit for concrete floors

The rack fastening kit fixes racks on solid concrete floors.
 

Further accessories

Further standard rack accessories for upgrading or optimising cable distribution racks are available:

• Doors
• Break-out plate for microduct
• Front-mountable mandrel assembly
• Conduit
• Further accessories on request