For further information please refer to data sheet.
LNA is connected to
Port 3
Input voltage
3 V ... 5.5 V
Current cunsumption
45 mA
Noise figure
2 dB
Total gain @90° elevation
38 dBic
Remarks
Values for LNA power consumption, noise figure and gain are given for a 5V operating voltage and may differ slightly for a lower voltage.
This Antenna is compliant with the Radio Equipment Directive 2014/53/EU EMC: EN50121-3-2 (2016)
Remarks
Indicated VSWR values are valid for a metallic ground plane of 0.5 x 0.5m or larger. In the 790-7125 MHz band, Indicated VSWR values are also valid for installations on non-metallic surfaces (no specific ground plane requirements). Indicated gain values will be achieved on a metallic ground plane of 1 x 1 m or larger.
Weight
1.5 kg
Dimensions
81.6 mm x 102.5 mm x 352.5 mm (Height x Width x Depth)
Windload
Wind Speed survival: 500 km/h
Remarks
High-voltage-protection: no voltage on RF port, if the catenary line touches the antenna (EN 50124-1, 3.8 kVDC, 27.5 kVAC, 1min).
High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element (protection against lightning and short circuit with catenary lines (40kA/0.125s, 70kA/0.05s).
Corrosion: Low corrosion design acc. to MIL-DTL-14072(E), 96 hours Salt Spray test.
Mounting: Shall be installed in longitudinal position to the wind/driving direction.
Suitable for installation on high speed trains with a maximum speed of 500 km/hr.
4x composite sealing washers included for silicone-free sealing of the mounting screws.
