Railway rooftop directional antenna for Wi-Fi bands between 2400 and 2650 MHz
Vertically polarized radiation pattern
Rugged design, meets EN 50155 Railway Standard
Fire retardant according to EN 45545-2 and NFPA-130
Works also on non-metallic surfaces
How to use it
Designed for use with dedicated trackside/tunnel antennas operating on the 2.4 GHz band
Specifications
Bands
2400 MHz ... 2550 MHz, VSWR 1.5, Gain 14.5 dBi
2550 MHz ... 2590 MHz, VSWR 1.5, Gain 13.5 dBi
2590 MHz ... 2630 MHz, VSWR 1.5, Gain 12.5 dBi
2630 MHz ... 2650 MHz, VSWR 1.5, Gain 11.5 dBi
Remarks
For further information please refer to data sheet.
Remarks
Indicated VSWR values are also valid for installations on non-metallic surfaces (no specific ground plane requirements). Indicated gain values will be achieved on a metallic ground plane of 1 x 1 m or larger.
Weight
2.2 kg
Dimensions
85 mm x 100 mm x 510 mm (Height x Width x Depth)
Windload
Wind Speed survival: 500 km/h
Remarks
High-voltage-protection: no voltage on RF port, if the catenary line touches the antenna (EN 50124-1, 27.5 kVAC/1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.1sec)
Corrosion: Low corrosion design according to MIL-F-14072(E), 96 hours Salt Spray test.
Mounting: Shall be installed in longitudinal position to the wind/driving direction.
Suitable for installation on high-speed trains with a maximum speed of 500 km/hr.