RF components

RF adapters connected to network analyser ports for test setup and signal interface.

Reliable RF components for accurate testing and signal integrity

RF components such as attenuators, terminations and DC blocks play a critical role in maintaining signal integrity by controlling power levels, blocking unwanted DC currents and minimising signal reflections. HUBER+SUHNER has a robust and diverse portfolio of components that are designed to meet the diverse requirements of test and measurement, communication and defence applications. These components are fully compatible with one another and deliver highly stable performance and exceptional quality, reflecting decades of experience and expertise in the development and manufacture of RF components. Designed for reliability and precision, they help ensure accurate measurements and consistent performance across demanding RF systems and applications.

Fixed attenuators

Fixed attenuators

RF attenuators are used to reduce the power of a signal without causing distortion of its waveform. They are used in many test and measurement and communication applications.

50 Ω or 75 Ω impedance
Fixed attenuation level from 0 dB up to 40 dB
Various bandwidth to improve the impedance matching between subsystems of its waveform
Wide range of interfaces
Male to female connectorisation

View all attenuators

DC blocks

DC blocks

A DC block separates or blocks DC voltage (galvanic isolation) and let pass RF frequency along a coaxial transmission line.

Broadband
RF signal passes with negligible loss
Blocking of DC
Galvanik isolation of centre conductor

View all coaxial dc blocks

Coaxial terminators

Coaxial terminators

Terminators (also called RF loads or dummy loads) are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications.

Impedance matched
Standard or precision types
Various bandwidth
Low and medium power

View terminator product families

Related products

COAXIAL TERMINATION, 50 Ohm, 4.3-10, plug (male)

COAXIAL TERMINATION, 50 Ohm, 4.3-10, plug (male)8516561665_4310-50-0-Z2/033_-ETerminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)225502716506.41.BTerminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)226438056560.41.BBTerminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)

COAXIAL TERMINATION, 50 Ohm, 7/16, jack (female)852184406530.41.0001Terminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

FEED THROUGH TERMINATION, 50 Ohm, BNC

FEED THROUGH TERMINATION, 50 Ohm, BNC225437426701.01.BTerminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

FEED THROUGH TERMINATION, 50 Ohm, N

FEED THROUGH TERMINATION, 50 Ohm, N226449166701.17.ATerminators are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications

COAXIAL FIXED ATTENUATOR, 50 Ohm, 0 dB, SMA

COAXIAL FIXED ATTENUATOR, 50 Ohm, 0 dB, SMA852697236600_SMA-50-4/111_UEAttenuators are used to reduce the power of a signal without causing distortion of its waveform. They are used in many test and measurement and communication applications.

COAXIAL FIXED ATTENUATOR, 50 Ohm, 1 dB, N

COAXIAL FIXED ATTENUATOR, 50 Ohm, 1 dB, N226415356801.17.AAttenuators are used to reduce the power of a signal without causing distortion of its waveform. They are used in many test and measurement and communication applications.

COAXIAL FIXED ATTENUATOR, 50 Ohm, 1 dB, PC 1.85

COAXIAL FIXED ATTENUATOR, 50 Ohm, 1 dB, PC 1.85852475646601_PC185-50-1/199_NEAttenuators are used to reduce the power of a signal without causing distortion of its waveform. They are used in many test and measurement and communication applications.

DC BLOCK, 50 Ohm, N

DC BLOCK, 50 Ohm, N225502321100.17.AA DC block separates or blocks DC voltage (galvanic isolation) and let pass RF frequency along a coaxial transmission line

High voltage 1 kV DC block

High voltage 1 kV DC block840821359077.41.0035DC blocks and DC-DC blocks provide galvanic isolation up to 18 kV. They block high amplitude and low frequency surge voltages in electric and railway lines.

High voltage 18 kV DC-DC block

High voltage 18 kV DC-DC block840064319077.17.0006DC blocks and DC-DC blocks provide galvanic isolation up to 18 kV. They block high amplitude and low frequency surge voltages in electric and railway lines.

IMPEDANCE MATCHING PAD, N

IMPEDANCE MATCHING PAD, N226495836001.00.0001Matching pads are designed to match 50 ohm with 75 ohm impedance of two different transmission lines of while preserving signal integrity.

Get in touch

Do you have questions?

We will gladly assist you. Send us a message or find your local contact:

Contact form

Go to contact form

Locations worldwide